Philips HDP1690 User manual - Page 36

11 Settings 1 Switch the device on using the on/off key. 2 After the initial screen the main menu appears. 3 Use the navigation keys to select Settings. 4 Confirm with OK. 5 Use ¡/¢ to select from the following settings. 6 Confirm with OK. 7 Modify the settings using OK, ¡/¢, 8 Confirm with OK. The ¿ key takes you one step back in the menu. Overview of the Menu Functions Wireless and Network WiFi - switching the wireless network (WLAN) off and on. Network Selection - select the wireless network with which the device is to connect. WiFi Hot Spot - activate and deactivate WLAN tethering. LAN - switching the LAN network (LAN) off and on. Advanced - (LAN mode only) check the Network actual IP address or change the address by inputting new address. You can also select Automatic or Use static IP DLNA Sharing - switching DLNA off and on. Bluetooth - switching the Bluetooth connection off and on. Image settings 3D - set the picture modes with 2D/3D options. Keystone - use ¡/¢ to set the keystone. Fit Screen - use ¡/¢ to select the screen mode to adjust the size of your screen. Projection mode Front - normal projection; the device is located in front of the projection surface/screen Rear - rear projection; the device is located behind the projection surface; the image is reflected horizontally. Front Ceiling - the device is hanging from the ceiling in an upside-down position; the image is rotated by 180 degrees. Rear ceiling - the device is located behind the projection surface, hanging from the ceiling in an upside-down position; the image is rotated by 180 degrees and reflected horizontally. Wall color correction - colour correction of the projected image to adjust to coloured projection surfaces Smart Settings - select predefined settings for brightness / contrast / colour saturation. If you modify these settings, the setting is switched to Manual. Brightness - use ¡/¢ to adjust the brightness and press OK to confirm. Contrast - use ¡/¢ to adjust the contrast and press OK to confirm. Advanced Colour temperature - set to Warm to enhance hotter colors such as red, or set to Cool to make picture bluish. Dynamic contrast - adjusts the contrast to keep it at the best level according to the brightness of the screen. Color space - to convert the color space setting to another standard. Gamma - adjusts the gamma correction according to the type of the projected image. Manual colors RGB - manually adjust the hue, saturation and brightness of colors in RGB mode. Use to adjust the colors according to your needs. Manual colors CMY - manually adjust the hue, saturation and brightness of colors in CMY mode. Use to adjust the colors according to your needs. Reset - valid manual modifications of colors RGB and CMY. Sound Settings: Volume - adjust the volume Deep Bass - switching the deep bass on and off Wide sound - switching the wide sound on and off Equalizer - select the equalizer mode Smart volume - turn on/off the volume level automatic control function Key beep - turn key tones on and off Speaker - switching the speaker on and off System settings Date and time - set date and time Android Settings - set Android system 36 Philips · HDP16x0 & HDP16x0TV