Philips HDP1690 User manual - Page 19

Update the software in my projector You can find the Screeneo firmware version on the site « Philips »: www.philips.com/screeneo for loading the file proceed as following You must download the file on SD-card formatted FAT16 or FAT32, on USB stick or on USB digital support in order to update your Screeneo. Get yourself a suitable digital media and insert it into your computer. 1 Launch an Internet browser, in the address bar, type the address: www.philips.com/screeneo. 2 Choose your country and click on the language. 3 Click on View All 4 Products for select your model. 4 Select exactly your model with mouse. 5 In the new screen, research Support and click on. 6 The "Screeneo Smart LED projector" screen appears. In the "Software & drivers" select your language and click Download file. Notice The file on the website is a zip file. It has to be unpacked and put on the root folder of the SD-card or USB-stick. 7 Depending on the browser used, save the file in the root of your digital media. 8 On the Screeneo projector, to check that it is turned off (OFF). 9 Remove the digital media on your computer and insert it into the port of Screeneo for your digital media. 10 DANGER! Inserting the digital media! Never pull out the digital media while the device is accessing it. This could cause data to be damaged or lost. Switch the device off in order to make sure that the device does not access the memory card. 11 Long press the ON/OFF button on the projector to turn it on. 12 After the initial screen, the main menu appears. Use the navigation keys to select Settings. 13 Confirm with OK. 14 Use ¡/¢ to select Maintenance. 15 Confirm with OK. 16 Use ¡/¢ to select Firmware Update. 17 Confirm with OK. 18 Use ¡/¢ to select Install. 19 Confirm with OK. 20 The device turns off and on again. After around 5 minutes the Language Selection screen appears. The firmware update is now completed. Notice If an error occurs during the firmware update process retry the procedure or contact your dealer. Copy the software on digital media (eg USB-stick) Use the USB ports on the projector to insert digital media. 1 Use ¡/¢ to select APPs. 2 Confirm with OK. 3 Use ¡/¢ to select Explorer. 4 Confirm with OK. 5 Use ¡/¢ to select Internal Flash. 6 Confirm with OK. 7 Use ¢ to select Download. 8 ScreeneoWLink_Setup.exe file appears in the main window. 9 Press long OK button on the remote control. 10 Use ¡/¢ to select Copy. 11 Confirm with OK. 12 Use you move on to the digital media that you have connected. 13 Confirm with OK. 14 Press long OK button on the remote control. 15 Use ¡/¢ to select Paste. 16 Confirm with OK. 17 ScreeneoWLink_Setup.exe file is copied to the digital media. Wait that it appears in the browser window before removing the digital media projector. Install the ScreeneoWLink software on my computer 1 Insert the digital media containing the ScreeneoWLink_Setup.exe file on an appropriate port on your computer. 2 On desktop PC or laptop, select the digital media containing the file and double click the executable. 3 Follow the instructions that appear on the screen. 4 Agree to have the ScreeneWLink icon on your desktop. 5 When installation is complete, restart your computer. Connect to the Playback Device 19