Philips HDP1690 User manual - Page 5
Power Supply, Wireless Network WLAN, 3D glasses use, Dolby Digital
View all Philips HDP1690 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Power Supply Before turning on your device, check that the outlet that you are going to plug it into conforms to the indications shown on the information plate (voltage, current, power network frequency) located on your device. This device shall be connected to a single phase power network. The device shall not be installed on bare ground. Only use the power cable that is supplied with your device. Your device is delivered with a grounded power cord. It is imperative to connect a grounded connector to a grounded outlet connected to the building earthing. The socket outlet shall be installed near the equipment and shall be easily accessible. The product should be supplied by a power system compliant with LPS requirements of 2.5 of UL60950-1. In case of failure, the power cable is the disconnect device for this equipment. To remove all electrical power from the equipment, disconnect the power cable from the electrical outlet. Turn off the device and unplug from the power outlet before cleaning the surface. Use a soft, lint-free cloth. Never use liquid, gaseous or easily flammable cleansers (sprays, abrasives, polishes, alcohol). Do not allow any moisture to reach the interior of the device. DANGER! High Power LED This device is equipped with high power LED (Light Emitting Diode), which emit very bright light. Do not look directly into the projector lens. This could cause eye irritation or damage. • how to make a proper and regular cleaning and disinfection in the case of any particular eventualities-ocular infections, infestations of the head, mixed use, etc... where disinfection of the glasses is not possible as it may damage the functionality of the 3D glasses must be communicated to the consumer that in presence of these eventualitiesinfections is contraindicated the use of 3D glasses for the person concerned until the disappearance of the above circumstances; • 3D glasses must be kept out of children if there is the presence of small moving parts ingestible; • 3D glasses are to be used together with the instruments of vision correction in case the consumer is the bearer of lenses (eyeglasses or contact lenses); • You should stop watching 3D in the event of the occurrence of eye problems or discomfort, and in the event of a persistence of the same, consult a doctor. Dolby Digital Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Wireless Network (WLAN) The functioning of security systems, medical equipment or sensitive devices can be disrupted by the transmission power of the device. Observe any usage regulations (or restrictions) in the vicinity of such equipment. The use of this device can affect the operation of insufficiently shielded medical devices and hearing aids and pacemakers through the release of high frequency radiation. Also consult a doctor or the manufacturer of the medical device to establish whether these are sufficiently shielded from external high frequency radiation. 3D glasses use The use of 3D glasses in home for watching TV shows: • is contraindicated for children less than 6 years old; • for children from 6 years old to adulthood, should be limited to the vision for a maximum time equal to the duration of a film show; • the same time limit is also recommended for adults; • must be restricted to watching only 3D content; General Safety Information 5