Philips HDP1690 User manual - Page 18

Connecting the headphones 1 Before connecting the headphones, turn down the volume on the device. 2 Connect the headphones to the projector's headphone slot. The device speakers deactivate automatically when the headphones are connected. 7 Connect the external device (smartphone or tablet) to the same WiFi network that the projector. 8 Select on the WifiDisplay application of the external device the name of the projector connection (in the example Screeneo_5f31). 9 Connect the external device (smartphone or tablet) to the projector, it will show up connecting. 10 In the WifiDisplay application of the projector, it will show up the message Invitation to connect, Decline or Accept, select Accept. PHILIPS 3 After connecting the headphones, increase the volume to a comfortable level. DANGER! Danger of Hearing Damage Do not use the device over a longer time at high volume - especially when using headphones. This could lead to the risks of hearing damage. Before connecting the headphones, turn down the volume on the device. After connecting the headphones, increase the volume to a comfortable level. WiFiDisplay (Miracast) Notice Only the Miracast-certified devices can be used with this function. 1 Switch the device on using the on/off key. 2 After the initial screen the main menu appears. Notice The projector must be connected to a WiFi network. 3 Use the navigation keys to select APPs. 4 Confirm with OK. 5 Use the navigation keys to select WifiDisplay. 6 Confirm with OK. Notice The name used to identify the projector can be modified in the Setting menu. Directly Connecting Projector to Computer using WLAN (WiFi Streaming) With the ScreeneoWLink software you can connect the projector to a computer or a laptop over your wireless network. For this purpose, both devices must be connected to the same wireless network. 1 Intall the ScreeneoWlink software on your computer. The ScreeneoWlink software is stored in the Download folder, you can get it by SD card or USB disk from the address: APPs_explorer_internal flash_Download. 2 Connect the device with the wireless network (see also Wireless Network (WLAN), page 22). 3 Start ScreeneoWLink (Viewer) on your computer. 4 Click the ScreeneoWLink icon in the notification area and start the manager window. You are now able to search for projectors in the network (Search WIFI projector) and start the projection (Start projection). ScreeneoWLink software It allows to connect the projector to a desktop PC or laptop via the wireless or wired network and to use the Screeneo as computer screen. For this, both devices must be connected to the same wireless or wired network. Screeneo firmware version 1.20 must be installed on your projector. Check the version of firmware installed on your projector by going to the Settings menu > Maintenance > Firmware version. If the Screeneo firmware version is 1.20, refer to paragraph Install the ScreeneoWLink software on my computer. If the Screeneo firmware version is less than 1.20, refer to paragraph Update the software in my projector. 18 Philips · HDP16x0 & HDP16x0TV