Philips MCD515 User manual - Page 34

English Radio Reception ECO POWER STANDBY-ON BAND RECORD DISPLAY CLOCK SET MCD515 DVD MICRO THEATRE iR PRESET TUNING SOURCE PROGRAM DSC DBB INCREDIBLE SURROUND VOLUME OPEN/ ANGLE A-B MODE PROGRAM Tuning to radio stations 1 Select TUNER source. ➜ "FM" or "AM" is displayed. 2 Press BAND/DISPLAY (TUNER on the remote) to select the desired waveband : FM or AM. 3 Press and hold TUNING 22/33 and then release it. ➜ The display will show "SEARCH" until a radio station with sufficient signal strength is found. 4 Repeat step 3 if necessary until you find the desired station. ● To tune to a weak station, press TUNING 22/33 briefly and repeatedly until you have found optimal reception. Programming radio stations You can store up to 40 radio stations in the memory (20 for FM and 20 for AM). Manual programming 1 Tune to your desired station (refer to "Tuning to radio stations"). 2 Press PROGRAM to activate programming. ➜ PROG flashes on the display, in which X stands for the programme number. 3 Press PRESET í/ë to allocate a number from 1 to 20 for this station. 4 Press PROGRAM again to confirm the setting. ➜ The frequency of the preset station is shown. 5 Repeat the above four steps to store other stations. ● You can override a preset station by storing another frequency in its place. Note: - During setting, if no button is pressed within 30 seconds, the system will exit manual programming automatically. Automatic programming Press PROGRAM for more than three seconds to activate programming. ➜ All available stations are programmed. ➜ AUTO is displayed and available stations are programmed in order of waveband. Tuning to preset radio stations ● Press PRESET í/ë until the desired preset station is displayed. 34