Pioneer AVH-P5100DVD Owner's Manual - Page 19
Opening and closing the LCD panel
UPC - 012562944401
View all Pioneer AVH-P5100DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Operating this unit Section 03 Operating this unit 2 Touch the desired key to display the function names you want to operate. # To go to the next group of function names, touch NEXT. # To return to the previous group of function names, touch PREV. 3 Touch ESC to return to the display of each source. Opening and closing the LCD panel The LCD panel will be opened or closed automatically with the turning of the ignition switch on or off. You can turn off the automatic close/open function. (Refer to page 48.) ! Do not close the LCD panel with hands by force. That cause malfunction. ! The automatic close/open function will op- erate the display as follows. - When the ignition switch is turned OFF while the LCD panel is opened, the LCD panel will close after six seconds. - When the ignition switch is turned ON again (or turned to ACC), the LCD panel will be opened automatically. - Removing or attaching the front panel will automatically close or open the LCD panel. (Refer to page 14.) ! When the ignition switch is turned OFF after the LCD panel has been closed, turning the ignition switch ON again (or turning it to ACC) will not open the LCD panel. In this case, press OPEN/CLOSE to open the LCD panel. ! When closing the LCD panel, check to make sure that it has closed completely. If the LCD panel has stopped halfway, leaving it like this could result in damage. CAUTION Keep hands and fingers clear of the unit when opening, closing, or adjusting the LCD panel. Be especially cautious of children's hands and fingers. % Press OPEN/CLOSE to open the LCD panel. # To close the LCD panel, press OPEN/CLOSE again. Adjusting the LCD panel angle Important ! If you can hear the LCD panel knocking against your vehicle's console or dashboard, touch TILT ( ) to move the LCD panel a little forward. ! When adjusting the LCD panel angle, be sure to touch TILT ( / ). Forcibly adjusting the LCD panel by hand may damage it. % Touch TILT ( / ) to adjust the LCD panel to an easily viewable angle. The LCD panel angle continues changing as long as you touch TILT ( / ) and hold. # The adjusted LCD panel angle will be memorized and automatically returned to the next time the LCD panel is opened. Turning the LCD panel horizontal When the LCD panel is upright and it hinders the operation of the air conditioner, the panel can be turned horizontal temporarily. En 19 19