Pioneer AVH-P5100DVD Owner's Manual - Page 84

Section 04 Available accessories 4 Select the position for the seat on which the microphone is placed. Refer to Using the position selector on page 75. # If no position is selected before you start auto TA and EQ, FRONT-L is selected automatically. 5 Press SRC and hold until the unit turns off. 6 Press and hold EQ to enter the auto TA and EQ measurement mode. 7 Plug the microphone into the microphone input jack on the multi-channel processor. error message is displayed. (Refer to Understanding auto TA and EQ error messages on page 89.) 11 Touch ESC to cancel the auto TA and EQ mode. 12 Store the microphone carefully in the glove compartment. Store the microphone carefully in the glove compartment or any other safe place. If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, color change or malfunction. For details concerning operation, refer to the multi-channel processor's operation manual. 8 Touch START to start the auto TA and EQ. 9 Get out of the car and close the door within 10 seconds when the 10-second count-down starts. The measurement tone (noise) is outputted from the speakers, and auto TA and EQ begins. # When all speakers are connected, auto TA and EQ is completed in about nine minutes. # To stop auto TA and EQ, touch STOP. # To cancel auto TA and EQ on the way, touch BACK or ESC. 10 When auto TA and EQ is completed, Complete is displayed. When correct measurement of car interior acoustic characteristics is not possible, an 84 En 84