Pioneer AVH-P5100DVD Owner's Manual - Page 95
Handling the display, Liquid crystal display LCD screen, Keeping the display in good, condition, - repaired
UPC - 012562944401
View all Pioneer AVH-P5100DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Additional Information Appendix Additional Information ! Do not disassemble or modify this unit, as there are high-voltage components inside which may cause electric shock. Be sure to consult your dealer or the nearest authorized PIONEER Service Station for internal inspection, adjustments, or repairs. Handling the display ! When the display is subjected to direct sunlight for a long period of time, it will become very hot resulting in possible damage to the LCD screen. When not using this unit, close the display and avoid exposing it to direct sunlight. ! The display should be used within the temperature ranges shown below. Storage temperature range: -4 °F to +176 °F At temperatures higher or lower than the operating temperature range, the display may not operate normally. ! The LCD screen is exposed in order to increase its visibility within the vehicle. Please do not press strongly on it as this may damage it. ! Do not place anything on the display when it is opened. Also, do not attempt to carry out angle adjustment, or open/close the display by hand. Applying strong force to the display may damage it. ! Do not push the LCD screen forcefully as this may scratch it. ! Be careful not to place anything between the display and the main body when the display is opening or closing. If an object gets between the display and main body, the display may stop working. ! Be careful of fingers, long hair, and loose articles of clothing which could possibly get caught between the display and the main body and cause serious injury. Liquid crystal display (LCD) screen ! If the display is near the vent of an air conditioner when it is opened, make sure that air from the air conditioner is not blowing on it. Heat from the heater may damage the LCD screen, and cool air from the cooler may cause moisture to form inside the display resulting in possible damage. Also, if the display is cooled down by the cooler, the screen may become dark, or the life span of the small fluorescent tube used inside the display may be shortened. ! Small black dots or white dots (bright dots) may appear on the LCD screen. These are due to the characteristics of the LCD screen and do not indicate a problem with the display. ! At low temperatures, the LCD screen may be dark for a while after the power is turned on. ! The LCD screen will be difficult to see if it is exposed to direct sunlight. ! When using a portable phone, keep the antenna of the portable phone away from the display to prevent disruption of the video by the appearance of spots, colored stripes, etc. Keeping the display in good condition ! When removing dust from the screen or cleaning the display, first turn the system power off, then wipe with a soft dry cloth. ! When wiping the screen, take care not to scratch the surface. Do not use harsh or abrasive chemical cleaners. Small fluorescent tube ! A small fluorescent tube is used inside the display to illuminate the LCD screen. - The fluorescent tube should last for approximately 10 000 hours, depending on operating conditions. (Using the display at low temperatures reduces the service life of the fluorescent tube.) En 95 95