Pioneer AVH-P5100DVD Owner's Manual - Page 50

Section 03 Operating this unit ! It is possible to connect a portable audio/ video player by using a 3.5 mm plug (4 pole) to RCA cable, which is sold separately. However, depending on the cable, reverse connection between red (right side audio) cable and yellow (video) cable is required. Otherwise, audio and video may not be correctly reproduced. % Insert the mini plug into the AUX input jack on this unit. For more details, refer to What's what on page 16. IP-BUS-RCA interconnector (AUX 2) When connecting auxiliary device using an IPBUS-RCA Interconnector (sold separately) % Use an IP-BUS-RCA Interconnector such as the CD-RB20/CD-RB10 (sold separately) to connect this unit to auxiliary device featuring RCA output. For more details, refer to the IP-BUS-RCA Interconnector owner's manual. # You can only make this type of connection if the auxiliary device has RCA outputs. Selecting AUX as the source % Touch the source icon and then touch AUX 1/AUX 2 to select AUX as the source. # If the auxiliary setting is not turned on, AUX cannot be selected. For more details, refer to Switching the auxiliary setting on page 42. Setting the AUX title The title displayed for the AUX source can be changed. ! Each title can be up to 10 characters long. 1 After you have selected AUX as the source, touch AV MENU and FUNCTION MENU and then touch NAME EDIT. # When the touch panel keys are not displayed, you can display them by touching the screen. 2 Touch ABC to select the desired character type. Touch ABC repeatedly to switch between the following character types: Alphabet (upper case)-Alphabet (lower case) -European letters, such as those with accents (e.g You can select to input numbers and symbols by touching 123. 3 Touch a or b to select a letter of the alphabet. 4 Touch d to move the cursor to the next character position. 5 Touch OK to store the entered title in memory. 6 Touch ESC to return to the ordinary display. Using the external unit External unit refers to a Pioneer product (such as ones available in the future) that, although incompatible as a source, enables control of basic functions with this unit. Two external units can be controlled with this unit. When two external units are connected, the external unit is automatically allocated to external unit 1 or external unit 2 by this unit. Basic operations of the external unit are explained below. Allocated functions are different depending on the connected external unit. For details concerning functions, refer to external unit's owner's manual. Selecting the external unit as the source % Touch the source icon and then touch EXT 1/EXT 2 to select external unit as the source. 50 En 50