Pioneer AVH-X2500BT Owner's Manual - Page 34
Adjusting loudness, Using subwoofer output, Boosting the bass, Using the high pass filter
View all Pioneer AVH-X2500BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Section 18 Audio adjustments Audio adjustments Adjusting loudness Loudness compensates for deficiencies in the low-frequency and high-frequency ranges at low volume. 7 Touch c or d next to Frequency to select the cut-off frequency. 50Hz-63Hz-80Hz-100Hz-125Hz Only frequencies lower than those in the selected range are outputted from the subwoofer. 1 Press the home button to switch to the home display. 2 Touch the audio function key to open the audio menu. 3 Touch c or d to select a desired level for loudness. Off (off)-Low (low)-Mid (mid)-High (high) Boosting the bass You can boost the bass level. 1 Press the home button to switch to the home display. 2 Touch the audio function key to open the audio menu. Using subwoofer output This unit is equipped with a subwoofer output which can be turned on or off. ! The cut-off frequency and output level can be adjusted when the subwoofer output is on. 1 Press the home button to switch to the home display. 2 Touch the audio function key to open the audio menu. 3 Touch Subwoofer on the audio function menu. 4 Touch On or Off next to Subwoofer to turn the subwoofer output on or off. 5 Touch Normal or Reverse next to Phase to select the phase of subwoofer output. 6 Touch c or d next to Level to adjust the output level of the subwoofer. Range: +6 to -24 3 Touch c or d to select a desired level. Range: 0 to +6 Using the high pass filter When you do not want low sounds from the subwoofer output frequency range to play from the front or rear speakers, turn on the HPF (high pass filter). Only frequencies higher than those in the selected range are output from the front or rear speakers. 1 Press the home button to switch to the home display. 2 Touch the audio function key to open the audio menu. 3 Touch c or d next to the frequency to select cut-off frequency. Off (off)-50Hz-63Hz-80Hz-100Hz- 125Hz Only frequencies higher than those in the selected range are output from the front or rear speakers. Adjusting source levels With SLA (source level adjustment), the volume levels of each source can be adjusted to prevent significant differences between sources. ! Settings are based on the FM volume level, which remains unchanged. 1 Press the home button to switch to the home display. 2 Touch the audio function key to open the audio menu. 3 Compare the FM volume level with the level of the source you wish to adjust. 4 Touch Source Level Adjuster on the audio function menu. 5 Touch or ume. Range: +4 to -4 to adjust the source vol- Notes ! Source Level Adjuster is not available when FM is selected as the source. ! The AM volume level can also be adjusted with this function. ! Video CD, CD, compressed audio, DivX, MPEG-1, MPEG-2 and MPEG-4 are automatically set to the same source level adjustment volume. 34 En