Pioneer DEH-6400BT Operation Manual - Page 10

Section 02 Operating this unit ! The tuner automatically stores the three latest radio text broadcasts received, replacing the oldest text with the newest text. Function settings 1 Press M.C. to display the main menu. 2 Turn M.C. to change the menu option and press to select FUNCTION. 3 Turn M.C. to select the function. After selecting, perform the following procedures to set the function. ! If MW/LW band is selected, only BSM, Local and Tuning Mode are available. BSM (best stations memory) BSM (best stations memory) automatically stores the six strongest stations in the order of their signal strength. 1 Press M.C. to turn BSM on. To cancel, press M.C. again. Regional (regional) When Alternative FREQ is used, the regional function limits the selection of stations to those broadcasting regional programs. 1 Press M.C. to turn the regional function on or off. Local (local seek tuning) Local seek tuning lets you tune in to only those radio stations with sufficiently strong signals for good reception. 1 Press M.C. to turn local on. ! To cancel, press M.C. again. 2 Turn LEVER left or right to select the desired set- ting. FM: Level 1-Level 2-Level 3-Level 4 MW/LW: Level 1-Level 2 The highest level setting allows reception of only the strongest stations, while lower levels allow the reception of weaker stations. PTY search (program type selection) You can tune in to a station using PTY (program type) information. 1 Turn LEVER left or right to select the desired set- ting. News&Inf-Popular-Classics-Others 2 Press M.C. to begin the search. The unit searches for a station broadcasting that type of program. When a station is found, its program service name is displayed. PTY (program type ID code) information is listed in the following section. Refer to PTY list on the previous page. To cancel the search, press M.C. again. The program of some stations may differ from that indicated by the transmitted PTY. If no station is broadcasting the type of program you searched for, Not found is displayed for about two seconds and then the tuner returns to the original station. Traffic Announce (traffic announcement standby) 1 Press M.C. to turn traffic announcement standby on or off. Alternative FREQ (alternative frequencies search) When the tuner cannot get a good reception, the unit automatically searches for a different station in the same network. 1 Press M.C. to turn the alternative frequencies search on and off. News interrupt (news program interruption) 1 Press M.C. to turn the NEWS function on or off. Tuning Mode (LEVER tuning setting) You can assign a function to the LEVER on the unit. Select Manual (manual tuning) to tune up or down manually or select Preset (preset channel) to switch between preset channels. 1 Press M.C. to select Manual or Preset. 10 En