Pioneer DEH-6400BT Operation Manual - Page 28

Appendix Additional information Message CHECK USB ERROR-19 Cause Action The USB connec- Check that the tor or USB cable USB connector or has short- USB cable is not circuited. caught in some- thing or damaged. The connected USB storage device consumes more than 500 mA (maximum allowable current). Disconnect the USB storage device and do not use it. Turn the ignition switch to OFF, then to ACC or ON and then connect only compliant USB storage devices. The iPod oper- Make sure the conates correctly but nection cable for does not charge. the iPod has not shorted out (e.g., not caught in metal objects). After checking, turn the ignition switch OFF and back ON, or disconnect the iPod and reconnect. Communication failed. ! Perform one of the following operations. -Turn the ignition switch OFF and back ON. -Disconnect or eject the external storage device. -Change to a different source. Then, return to the USB or SD source. ! Disconnect the cable from the iPod. Once the iPod's main menu is displayed, reconnect the iPod and reset it. iPod failure. Disconnect the cable from the iPod. Once the iPod's main menu is displayed, reconnect the iPod and reset it. 28 En Message ERROR-23 ERROR-16 STOP Not found Cause Action USB storage device was not formatted with FAT12, FAT16 or FAT32. USB storage device should be formatted with FAT12, FAT16 or FAT32. The iPod firmware version is old. Update the iPod version. iPod failure. Disconnect the cable from the iPod. Once the iPod's main menu is displayed, reconnect the iPod and reset it. There are no Select a list that songs in the cur- contains songs. rent list. No related songs. Transfer songs to the iPod. Bluetooth device Message ERROR-10 Cause Action The power failed for the Bluetooth module of this unit. Turn the ignition switch OFF and then to ACC or ON. If the error message is still displayed after performing the above action, please contact your dealer or an authorized Pioneer Service Station.