Pioneer DEH-X6600BT Owner's Manual - Page 11

Using this unit Using this unit Section 02 English Setting up for hands-free phoning 1 Connection Use the Bluetooth telephone connection menu. Refer to Connection menu operation on page 11. 2 Function settings Use the Bluetooth telephone function menu. Refer to Phone menu operation on page 12. Storing and recalling phone numbers 1 To store: Press and hold down one of the preset tuning buttons (1/ to 6/ ). The functions below can be used to store phone numbers to the memory. For details, refer to Phone menu operation on page 12. ! MISSED (missed call history) ! DIALED (dialed call history) ! RECEIVED (received call history) ! PHONE BOOK (phone book) Basic operations Making a phone call 1 Refer to Phone menu operation on page 12. Answering an incoming call 1 When a call is received, press . Ending a call 1 Press . Rejecting an incoming call 1 When a call is received, press and hold . Answering a call waiting 1 When a call is received, press . Switching between callers on hold 1 Press M.C. Canceling call waiting 1 Press and hold . Adjusting the other party's listening volume 1 Press c or d while talking on the phone. ! When private mode is on, this function is not available. Turning private mode on or off 1 Press BAND/ while talking on the phone. Note If private mode is selected on the cellular phone, hands-free phoning may not be available. 2 To recall: Press one of the preset tuning buttons (1/ to 6/ ). 3 Press M.C. to make a call. Switching the display Selecting the desired text information You can change the display during a call. 1 Press DISP to cycle between the following: ! Call time ! Name of other party ! Number of other party Using voice recognition This feature can be used on an iPhone equipped with voice recognition that is connected by Bluetooth. 1 Press and hold M.C. to switch to voice recognition mode. 2 Press M.C. and then talk into the microphone to input voice commands. To end voice recognition mode, press BAND/ . Notes ! For details on voice recognition features, check the manual for your iPhone. ! In order for your voice commands to be recognized and interpreted correctly, ensure that conditions are suitable for recognition. ! Please note that wind blowing through the vehicle windows and noise coming from outside the vehicle can interfere with voice command operation. ! For optimum pick-up, the microphone should be placed directly in front of the driver at a suitable distance. ! Speaking too soon after the start of the command may cause voice recognition to fail. ! Speak slowly, deliberately, and clearly. Connection menu operation Important Connected devices may not work properly if more than one Bluetooth device is connected at a time (e.g. a phone and a separate audio player are connected simultaneously). 1 Press and hold to display the connection menu. # You cannot perform this step during a call. 2 Turn M.C. to select the function. Once selected, the following functions can be adjusted. DEVICELIST (connecting or disconnecting a device from the device list) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the name of a device you want to connect/disconnect. ! Press and hold M.C. to swap between the Bluetooth device address and the device name. 3 Press M.C. to connect/disconnect the selected device. If the connection is established, * is indicated on the device name. ! When no device is selected in the device list, this function is not available. DEL DEVICE (deleting a device from the device list) 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the name of a device you want to delete. ! Press and hold M.C. to swap between the Bluetooth device address and the device name. 3 Press M.C. to display DELETE YES. 4 Press M.C. to delete the device information from the device list. ! When no device is selected in the device list, this function is not available. ! While this function is in use, do not turn off the engine. ADD DEVICE (connecting a new device) En 11