Pioneer DEH-X6600BT Owner's Manual - Page 16
Initial menu, Using this unit - reset
View all Pioneer DEH-X6600BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Section 02 Using this unit Using this unit 2 Turn M.C. to change the menu option and press to select MIXTRAX. 3 Turn M.C. to select the MIXTRAX function. Once selected, the following MIXTRAX functions can be adjusted. The function is enabled when MIXTRAX is on. ! FLASH AREA and FLASH PATTERN are not available for DEH-X4600BT. ! MIX PATTERN is not available for DEHX6600BS, DEH-X6600BT, DEH-X66BT and DEH-X3600S. SHORT PLAYBCK/SHORT MODE (short playback mode) You can select the length of the playback time. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the desired setting. 1.0 MIN (1.0 minute)-1.5 MIN (1.5 minutes)- 2.0 MIN (2.0 minutes)-2.5 MIN (2.5 minutes) -3.0 MIN (3.0 minutes)-OFF (off) FLASH AREA (flash area) You can select areas for flashing colors. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the desired setting. KEY/DISPLAY (key and display)-KEY (key)- OFF (off) ! When OFF is selected, the color set under ILLUMI is used as the display color. FLASH PATTERN (flash pattern) The flashing color and MIXTRAX special effects display change with changes in the sound and bass levels. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the desired setting. ! SOUND LEVEL 1 to SOUND LEVEL 6 - The flash pattern changes according to the sound level. Select a desired mode. ! LOW PASS 1 to LOW PASS 6 - The flash pattern changes according to the bass level. Select a desired mode. ! RANDOM 1 - The flash pattern changes randomly according to the sound level mode and low pass mode. ! RANDOM 2 - The flash pattern changes randomly according to the sound level mode. ! RANDOM 3 - The flash pattern changes randomly according to the low pass mode. MIX PATTERN (mix pattern) The MIXTRAX special effects display changes with changes in the audio level. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the desired setting. ! SOUND LEVEL - The mix pattern changes according to the sound level. ! LOW PASS - The mix pattern changes according to the bass level. ! RANDOM - The mix pattern changes randomly according to the sound level mode and low pass mode. DISPLAY FX/DISP FX (display effect) The MIXTRAX special effects display can be turned on or off. 1 Press M.C. to select the desired setting. ON (MIXTRAX special effects display)-OFF (normal display) CUT IN FX (manual cut-in effect) You can turn on or off the MIXTRAX sound effects while manually changing tracks. 1 Press M.C. to select the desired setting. ON (on)-OFF (off) Initial menu 1 Press and hold SRC/OFF until the unit turns off. 2 Press M.C. to display the main menu. 3 Turn M.C. to change the menu option and press to select INITIAL. 4 Turn M.C. to select the initial menu function. Once selected, the following initial menu functions can be adjusted. ! REAR-SP is not available for DEH-X6600BT, DEH-X66BT, DEH-X4600BT and DEH-X3600S. ! SP-P/O MODE is not available for DEHX6600BS. ! S/W UPDATE is not available for DEHX3600S. ! SXM RESET is not available for DEHX6600BT, DEH-X66BT and DEH-X4600BT. REAR-SP (rear output setting) The rear speaker leads output and the RCA output of this unit can be used to connect a full-range speaker or subwoofer. Select a suitable option for your connection. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the desired setting. ! FUL - Select when there is a full-range speaker connected to the rear speaker leads output. ! SW - Select when there is a subwoofer connected directly to the rear speaker leads output without any auxiliary amp. SP-P/O MODE (rear output and preout setting) The rear speaker leads output and the RCA output of this unit can be used to connect a full-range speaker or subwoofer. Select a suitable option for your connection. 1 Press M.C. to display the setting mode. 2 Turn M.C. to select the desired setting. ! REAR/SUB.W - Select when there is a fullrange speaker connected to the rear speaker leads output and there is a subwoofer connected to the RCA output. ! SUB.W/SUB.W - Select when there is a subwoofer connected directly to the rear speaker leads output without any auxiliary amp and there is a subwoofer connected to the RCA output. ! REAR/REAR - Select when there is a fullrange speaker connected to the rear speaker leads output and the RCA output. If there is a full-range speaker connected to the rear speaker leads output and the RCA output is not used, you may select either REAR/SUB.W or REAR/REAR. S/W UPDATE (updating the software) 16 En