Pioneer FH-P5000MP Installation Manual - Page 37
Introduction of audio, adjustments, Using balance adjustment, Adjusting loudness, Audio Adjustments
View all Pioneer FH-P5000MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Introduction of audio
adjustments
1
Loud indicator
Appears in the display when loudness is
turned on.
2
SW indicator
Shows when the subwoofer output is turned
on.
3
Audio display
Shows the audio adjustments status.
%
Press AUDIO to display the audio func-
tion names.
Press
AUDIO
repeatedly to switch between
the following audio functions:
FAD
(balance adjustment)
³
Loud
(loudness)
³
SUB.W
(subwoofer setting)
³
80
(subwoofer
cut-off frequency)
³
SLOPE
(subwoofer slope)
³
Slope
(front high pass filter slope)
³
80
(front high pass filter cut-off frequency)
³
Slope
(rear high pass filter slope)
³
80
(rear
high pass filter cut-off frequency)
#
You can select the
80
(subwoofer cut-off fre-
quency) and the
SLOPE
(subwoofer slope) only
when subwoofer output is turned on in the
SUB.W
.
#
To return to the display of each source, press
BAND
.
Note
If you do not operate the audio function within
about 30 seconds, the display is automatically re-
turned to the source display.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1
Press AUDIO to select FAD.
Press
AUDIO
until
FAD
appears in the display.
#
If the balance setting has been previously ad-
justed,
BAL
will be displayed.
2
Push Multi Control up or down to ad-
just front/rear speaker balance.
Each pushing
Multi Control
up or down
moves the front/rear speaker balance towards
the front or the rear.
FAD :F25
±
FAD :R25
is displayed as the front/
rear speaker balance moves from front to rear.
#
FAD : 0
is the proper setting when only two
speakers are used.
3
Push Multi Control left or right to ad-
just left/right speaker balance.
Each pushing
Multi Control
left or right
moves the left/right speaker balance towards
the left or the right.
BAL :L25
±
BAL :R25
is displayed as the left/
right speaker balance moves from left to
right.
Adjusting loudness
Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.
1
Press AUDIO to select Loud.
Press
AUDIO
until
Loud
appears in the dis-
play.
2
Push Multi Control up to turn loudness
on.
Loud :ON
appears in the display.
Audio Adjustments
En
37
English
Section
09