Pioneer FH-P5000MP Installation Manual - Page 57
Specifications, Additional Information, General, Audio/DSP, CD player, Cassette player, FM tuner - cd mp3 cassette
View all Pioneer FH-P5000MP manuals
Add to My Manuals
Save this manual to your list of manuals |
Specifications
General
Rated power source
...............
14.4 V DC
(allowable voltage range:
10.8
±
15.1 V DC)
Grounding system
...................
Negative type
Max. current consumption
.....................................................
10.0 A
Dimensions (W × H × D):
Chassis
...............................
178 × 100 × 161 mm
Nose
.....................................
169 × 94 × 28 mm
Weight
..........................................
2.3 kg
Audio/DSP
Continuous power output is 22 W per channel minimum
into 4 ohms, both channels driven 50 to 15,000 Hz with
no more than 5% THD.
Maximum power output
.......
50 W × 4
Load impedance
......................
4
W
(4
±
8
W
allowable)
Preout max output level/output impedance
.....................................................
1.8 V/1 k
W
Loudness contour
...................
+10 dB (100 Hz), +7 dB (10
kHz) (volume:
±
30 dB)
Equalizer (13-Band Graphic Equalizer):
Frequency
..........................
50/80/125/200/315/500/800
Hz
1.25/2/3.15/5/8/12.5 kHz
Equalization range
........
±12 dB
Network:
HPF (Front/rear):
Frequency
................
50/63/80/100/125/160/200
Hz
Slope
..........................
±
6 dB/oct,
±
12 dB/oct, 0 dB/
oct
Gain
............................
0
±±
24 dB
Subwoofer:
Frequency
................
50/63/80/100/125/160/200
Hz
Slope
..........................
-6 dB/oct,
±
12 dB/oct,
±
18
dB/oct
Gain
............................
+6
±±
24 dB
Phase
........................
Normal/Reverse
CD player
System
..........................................
Compact disc audio system
Usable discs
..............................
Compact disc
Signal format:
Sampling frequency
.....
44.1 kHz
Number of quantization bits
...........................................
16; linear
Frequency characteristics ... 5
±
20,000 Hz (±1 dB)
Signal-to-noise ratio
...............
94 dB (1 kHz) (IEC-A net-
work)
Dynamic range
.........................
92 dB (1 kHz)
Number of channels
..............
2 (stereo)
MP3 decoding format
...........
MPEG-1 & 2 Audio Layer 3
WMA decoding format
.........
Ver. 7, 7.1, 8, 9
WAV signal format
..................
Linear PCM & MS ADPCM
Cassette player
Tape
................................................
Compact cassette tape (C-
30
±
C-90)
Tape speed
..................................
4.8 cm/sec
Fast forward/rewinding time
.....................................................
Approx. 100 sec (C-60)
Wow & flutter
.............................
0.09 % (WRMS)
Frequency response:
Metal
...................................
30
±
19,000 Hz (±3 dB)
Stereo separation
....................
45 dB
Signal-to-noise ratio:
Metal:
Dolby B NR IN
.......
67 dB (IEC-A network)
Dolby NR OUT
.......
61 dB (IEC-A network)
FM tuner
Frequency range
......................
87.5
±
108.0 MHz
Usable sensitivity
.....................
8 dBf (0.7 µV/75
W
, mono,
S/N: 30 dB)
50 dB quieting sensitivity
.....
10 dBf (0.9 µV/75
W
, mono)
Signal-to-noise ratio
...............
75 dB (IEC-A network)
Distortion
.....................................
0.3 % (at 65 dBf, 1 kHz,
stereo)
0.1 % (at 65 dBf, 1 kHz,
mono)
Frequency response
...............
30
±
15,000 Hz (±3 dB)
Stereo separation
....................
45 dB (at 65 dBf, 1 kHz)
AM tuner
Frequency range
......................
531
±
1,602 kHz (9 kHz)
530
±
1,640 kHz (10 kHz)
Usable sensitivity
.....................
18 µV (S/N: 20 dB)
Signal-to-noise ratio
...............
65 dB (IEC-A network)
Infrared remote control
Wavelength
.................................
940 nm ±50 nm
Output
...........................................
typ; 12 mw/sr per Infrared
LED
Note
Specifications and the design are subject to pos-
sible modifications without notice due to im-
provements.
Additional Information
En
57
English
Appendix