Pioneer P7600DVD Owner's Manual - Page 21
Loading a disc, Adjusting the volume, Turning the unit off, Using the rear display, Basic Operations
UPC - 012562745602
View all Pioneer P7600DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Basic Operations Section 04 Basic Operations Loading a disc % Insert a disc into the disc loading slot. Playback will automatically start. # If DVD AUTO PLAY is turned off, touch the source icon and then touch DVD to select DVD (refer to the previous page). # When a disc is loaded in this unit, touch the source icon and then touch DVD to select DVD. # To eject a disc, press EJECT. Notes ! The DVD player plays one, standard, 12-cm or 8-cm (single) disc at a time. Do not use an adapter when playing 8-cm discs. ! Do not insert anything other than a disc into the disc loading slot. Discs which can be played back are listed on Playable discs on page 8. ! If you cannot insert a disc completely or if after you insert a disc the disc does not play, check that the label side of the disc is up. Press EJECT to eject the disc, and check the disc for damage before inserting it again. ! If an error message such as ERROR-02 is displayed, refer to Error messages on page 99. Adjusting the volume % Use VOLUME to adjust the sound level. With the head unit, rotate VOLUME to increase or decrease the volume. With the remote control, press VOLUME to increase or decrease the volume. Turning the unit off % When using the touch panel keys, touch the source icon and then touch OFF. # When the source icon is not displayed, you can display it by touching the screen. % When using the button, press SOURCE and hold until the unit turns off. Using the rear display You can watch the video sources (such as DVD or AV) on rear display independently of front display. ! To watch a DVD/Video CD on the rear dis- play only, switch the operation mode on the remote control to DVD. And you can operate the DVD/Video CD playback on the rear display independently by the remote control. (Refer to page 18.) CAUTION When you have turned the rear display output on by pressing REAR ON, you cannot turn it off even if you press SOURCE and hold. In this case, press REAR ON and hold to turn the rear display output off. % Press REAR ON to select the video source on the rear display. Press REAR ON repeatedly to switch between the following video sources: F. SOURCE (same source as the front display) DVD (built-in DVD player)AV (video input) Rear display output is turned on and the illumination color of REAR ON changes to a different color from the other buttons. # You can also perform this operation by pressing REAR.S on the remote control. # To turn the rear display output off, press REAR ON and hold. # When selecting F. SOURCE, when the selected source is an audio source, nothing is displayed on rear display. # When you watch DVD (built-in DVD player) on both the front and the rear display, audio is not outputted from REAR OUT. # When selecting FRONT SOURCE in REAR MODE, audio is not outputted from REAR OUT. (Refer to Setting the video of rear display on page 94.) # When selecting FRONT SOURCE in REAR MODE, you can select F. SOURCE only. (Refer to Setting the video of rear display on page 94.) En 21