Pioneer P7600DVD Owner's Manual - Page 75
Using the auto-equalizer, Audio Adjustments
UPC - 012562745602
View all Pioneer P7600DVD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Audio Adjustments Section 15 Audio Adjustments ! The center speaker largely determines the sound image and getting the balance right isnt easy. We recommend reproducing a 2ch. audio (a CD for example) and getting the balance right among the speakers except for the center, and then reproducing a 5.1-ch. audio (Dolby Digital or DTS) and adjusting the center speaker output to the balance you have already got among the other speakers. 1 Touch A.MENU and AUDIO and then touch PARAMETRIC EQ. 2 Touch C.EQ to select the equalizer. Touch C.EQ repeatedly to switch between the following equalizers: SUPER BASS (S BASS) POWERFUL (PWRFUL)NATURALVOCAL FLATCUSTOM1CUSTOM2 CUSTOM3CUSTOM4 3 Touch POS to select the speaker to be adjusted. Each time you touch POS it selects speakers in the following order: FRONT (front speakers)REAR (rear speakers)CENTER (center speaker) # You cannot select speakers whose size is set at OFF. 4 Touch BAND to select the equalizer band to be adjusted. Each time you touch BAND it selects equalizer bands in the following order: LOW (low)MID (mid)HIGH (high) 5 Touch c or d to select the center frequency of selected band. Touch c or d until the desired frequency appears in the display. 40506380100125160200 2503154005006308001k 1.25k1.6k2k2.5k3.15k4k5k 6.3k8k10k12.5k (Hz) # You can select a center frequency from among 20 frequencies for each band. You can change the center frequency in 1/3-octave steps, but you cannot select frequencies that have intervals shorter than 1 octave among the center frequencies of the three bands. 6 Touch a or b to adjust the equalizer level. Each time you touch a or b it increases or decreases the equalizer level. +12dB 12dB is displayed as the level is increased or decreased. 7 Touch Q.Fac to select the desired Q factor. Each time you touch Q.Fac it switches between the following Q factor: WIDE (wide)NARROW (narrow) # You can adjust parameters for each band of the other speakers in the same way. 8 Touch ESC to return to the playback display. Using the auto-equalizer The auto-equalizer is the equalizer curve created by auto TA and EQ (refer to Auto TA and EQ (auto-time alignment and auto-equalizing) on page 81). You can turn the auto-equalizer on or off. 1 Touch A.MENU and AUDIO and then touch AUTO EQ. # You cannot use this function if auto TA and EQ has not been carried out. 2 Touch a to turn the auto-equalizer on. # To turn auto-equalizer off, touch b. En 75