Poulan 1994-04 User Manual - Page 5

KNOW YOUR UNIT A. INTRODUCTION Your Trimmer is a versatile product developed for large lawns and to make short work of a variety of lawn care tasks -- trimming, scalping, mowing, and sweeping. Special Features Include: • 18" Cutting Path • TAP GO® Cutting Head • All -Position Carburetor • 8 Inch, 4 Point Blade • Shoulder Strap with Warning Decal • Barrier Handlebar B. UNPACKING INSTRUCTIONS 1. After removing the contents from the carton, check the parts against the list. 2. Examine the parts for damage. Do not use damaged parts. 3. Notify your WEED EATER dealer immediately if a part is missing or damaged. NOTE: It is normal to hear the fuel filter rattle in an empty fuel tank. C. CARTON CONTENTS KEY NO. QTY • Engine/Drive Shaft/Bearing • Housing Assy. w/Safety Label 1 • Handlebar 1 • Plastic Shield - Trimmer Head 1 • Trimmer Head 1 • Metal Shield - Blade 1 * • Blade - 8 inch, 4 point 1 * • Shoulder Strap w/Warning 1 • Operator's Manual 1 • Loose Parts Bag 1 ** LOOSE PARTS BAG CONTENTS: • Mounting Block Cover - Handlebar 1 • Hex Wrench -5/32" 1 • Hex Wrench - 3/16" 1 (The following hardware is illustrated below) A. Screw - Plastic Shield 4 B. Screw 6 C. Flat Washer - Blade 1 * D. Cupped Washer - Blade 1 * E Flange Hex Nut - Blade 1 * F. Grass Washer - Trimmer Head 1 G. Retention Plate - Metal Shield 1 A WARNING Parts marked with * are critical and must be supplied by Weed Eater. Failure to use the proper parts can cause the blade to fly off and seriously injure the operator or others. D. HARDWARE USAGE NOTE:, This Hardware is packaged in the Plastic Bag. Refer to the Hardware reference letters below during assembly. HARDWARE SHOWN ACTUAL SIZE D. A. B. E. G. F. Figure 1