Poulan 1994-04 User Manual - Page 9

Fueling, Engine

Page 9 highlights

FUELING YOUR ENGINE FUEL SAFETY • Be sure to read the fuel safety section on page 4 of this manual before you begin. • If you do not understand the fuel safety section DO NOT attempt to fuel your unit; seek help from someone that does understand the fuel safety section or call our Customer Assistance Hotline at 1 -800 -554 -6723. FUEL MIXTURE • Your unit is powered by a two-cycle engine that requires a fuel mixture of regular unleaded gasoline and a high quality engine oil specially made for 2 -cycle, air cooled engines. Gasoline must be clean and not over two months old. CAUTION: I Too little oil or incorrect oil will cause the engine to overheat and seize. Always mix the fuel thoroughly in a container since gasoline and oil do not readily combine. DO NOT USE: • AUTOMOTIVE OIL • NMMA OIL for boat engines These oils do not have proper additives for 2 -cycle, air-cooled engines and can cause engine damage. USE THE FOLLOWING OIL: • WEED EATER 40:1, 2 -cycle engine oil Paramount, Poulan, or Poulan Pro brand 40:1, 2 -cycle engine oil is acceptable if mixed according to the instructions on the container. 40 PARTS GASOLINE TO 1 PART OIL= 1 gallon gasoline to 3.2 fl. oz. oil 2.5 gallon gasoline to 8.0 fl. oz. oil HOW MUCH OIL TO USE: WEED EATER 40:1, 2 -cycle engine oil is sold in both 3.2 ounce and 8 ounce containers. When you buy the 3.2 ounce container, mix it with 1 gallon of regular unleaded gasoline. If you purchase the 8 ounce container, mix it with 2-1/2 gallons of regular unleaded gasoline. Both of the above mixtures will provide 40 parts gasoline to 1 part oil . Paramount, Poulan, or Poulan Pro brand 40:1, 2 -cycle engine oil is also sold in the same size containers and may be mixed in the same manner. WHAT TO DO IF YOU USE ANOTHER BRAND OF OIL: Not all air cooled, 2 -cycle engine oils have the same qualities. If WEED EATER, Paramount, Poulan, or Poulan Pro brand 2 -cycle engine oil is not available, use a high quality 2-cycle engine oil recommended for air cooled engines. Mix at a ratio of 40:1 by mixing 3.2 ounces oil with 1 gallon of gasoline. 40:1 must be listed as a suggested mix ratio. HOW TO MIX FUEL AND FILL TANK NOTE: Do not mix gasoline and oil directly in the fuel tank. Pour the proper measure of engine oil into an approved, marked fuel container. Then, fill the container with regular unleaded gasoline. NOTE: If gasoline is already in the container, add the proper measure of 2 -cycle engine oil. Then, close the container tightly and shake it momentarily • Slowly remove the fuel cap. • Using a spout or funnel, fill the fuel tank with fuel mix. • Reinstall the fuel cap securely.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

FUELING
YOUR
ENGINE
FUEL
SAFETY
Be
sure
to
read
the
fuel
safety
section
on
page
4
of
this
manual
before
you
begin.
If
you
do
not
understand
the
fuel
safety
section
DO
NOT
attempt
to
fuel
your
unit;
seek
help
from
someone
that
does
under-
stand
the
fuel
safety
section
or
call
our
Customer
Assistance
Hotline
at
1
—800
—554
—6723.
FUEL
MIXTURE
Your
unit
is
powered
by
a
two—cycle
engine
that
requires
a
fuel
mixture
of
regular
unleaded
gaso-
line
and
a
high
quality
engine
oil
specially
made
for
2
—cycle,
air
cooled
engines.
Gasoline
must
be
clean
and
not
over
two
months
old.
CAUTION:
I
Too
little
oil
or
incorrect
oil
will
cause
the
engine
to
overheat
and
seize.
Always
mix
the
fuel
thoroughly
in
a
con-
tainer
since
gasoline
and
oil
do
not
readily
com-
bine.
DO
NOT
USE:
AUTOMOTIVE
OIL
NMMA
OIL
for
boat
engines
These
oils
do
not
have
proper
additives
for
2
—cycle,
air—cooled
engines
and
can
cause
engine
damage.
USE
THE
FOLLOWING
OIL:
WEED
EATER
40:1,
2
—cycle
engine
oil
Paramount,
Poulan,
or
Poulan
Pro
brand
40:1,
2
—cycle
engine
oil
is
acceptable
if
mixed
according
to
the
instructions
on
the
container.
40
PARTS
GASOLINE
TO
1
PART
OIL=
1
gallon
gasoline
to
3.2
fl
.
oz.
oil
2.5
gallon
gasoline
to
8.0
fl.
oz.
oil
HOW
MUCH
OIL
TO
USE:
WEED
EATER
40:1,
2
—cycle
engine
oil
is
sold
in
both
3.2
ounce
and
8
ounce
containers.
When
you
buy
the
3.2
ounce
container,
mix
it
with
1
gallon
of
regular
unleaded
gasoline.
If
you
purchase
the
8
ounce
container,
mix
it
with
2-1/2
gallons
of
regu-
lar
unleaded
gasoline.
Both
of
the
above
mixtures
will
provide
40
parts
gasoline
to
1
part
oil
.
Paramount,
Poulan,
or
Poulan
Pro
brand
40:1,
2
—cycle
engine
oil
is
also
sold
in
the
same
size
con-
tainers
and
may
be
mixed
in
the
same
manner.
WHAT
TO
DO
IF
YOU
USE
ANOTHER
BRAND
OF
OIL:
Not
all
air
cooled,
2
—cycle
engine
oils
have
the
same
qualities.
If
WEED
EATER,
Paramount,
Poulan,
or
Poulan
Pro
brand
2
—cycle
engine
oil
is
not
avail-
able,
use
a
high
quality
2
—cycle
engine
oil
recom-
mended
for
air
cooled
engines.
Mix
at
a
ratio
of
40:1
by
mixing
3.2
ounces
oil
with
1
gallon
of
gasoline.
40:1
must
be
listed
as
a
suggested
mix
ratio.
HOW
TO
MIX
FUEL
AND
FILL
TANK
NOTE:
Do
not
mix
gasoline
and
oil
directly
in
the
fuel
tank.
Pour
the
proper
measure
of
engine
oil
into
an
ap-
proved,
marked
fuel
container.
Then,
fill
the
container
with
regular
unleaded
gasoline.
NOTE:
If
gasoline
is
already
in
the
container,
add
the
proper
measure
of
2
—cycle
engine
oil.
Then,
close
the
container
tightly
and
shake
it
momen-
tarily
Slowly
remove
the
fuel
cap.
Using
a
spout
or
funnel,
fill
the
fuel
tank
with
fuel
mix.
Reinstall
the
fuel
cap
securely.