ProForm 14.0 Ce Elliptical English Manual - Page 12

Attach the Left Upper Body Arm 9 to

Get ProForm 14.0 Ce Elliptical PDF manuals and user guides View all ProForm 14.0 Ce Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

11. Identify the Right Upper Body Arm (8), which is marked with a “"Right”" sticker, and orient it as 11 shown. Have a second person hold the Right Upper Body Arm (8) near the Right Upper Body Leg (6). Attach the Right Upper Body Arm (8) to the Right Upper Body Leg (6) with three M8 x 16mm Screws (102) and three M8 Split Washers (103). 9 Attach the Left Upper Body Arm (9) to the Left Upper Body Leg (7) in the same way. See step 4 on page 8. Tighten the M8 x 16mm Screws (102). 7 Slide the Top Cover (27) downward and press it into the Right and Left Frame Covers (21, 22). 8 102 103 27 102 6 21, 22 12. Identify the Right Handlebar (10), which is marked with a “"Right”" sticker, and orient it as 12 shown. Have a second person hold the Right Handlebar (10) near the right side of the Upright (5). Insert the Pulse Wire (105) from the Right Handlebar (10) into the right side of the Upright (5) and pull it upward out of the top of the Upright. Tip: Avoid pinching the Pulse Wire (105). Attach the Right Handlebar (10) to the Upright (5) with two M8 x 16mm Screws (102) and two M8 Split Washers (103). Attach the Left Handlebar (11) in the same way. Avoid pinching the Pulse Wires (105) 105 11 5 105 103 10 102 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
12
12
11
9
7
6
8
102
102
103
11. Identify the Right Upper Body Arm (8), which
is marked with a ²Right³ sticker, and orient it as
shown.
Have a second person hold the Right Upper
Body Arm (8) near the Right Upper Body Leg (6).
Attach the Right Upper Body Arm (8) to the
Right Upper Body Leg (6) with three M8 x 16mm
Screws (102) and three M8 Split Washers (103).
Attach the Left Upper Body Arm (9) to the
Left Upper Body Leg (7) in the same way.
See step 4 on page 8. Tighten the M8 x
16mm Screws (102).
Slide the Top Cover (27) downward and press it
into the Right and Left Frame Covers (21, 22).
12. Identify the Right Handlebar (10), which is
marked with a ²Right³ sticker, and orient it as
shown.
Have a second person hold the Right Handlebar
(10) near the right side of the Upright (5).
Insert the Pulse Wire (105) from the Right
Handlebar (10) into the right side of the Upright
(5) and pull it upward out of the top of the
Upright.
Tip: Avoid pinching the Pulse Wire (105).
Attach the Right Handlebar (10) to the Upright
(5) with two M8 x 16mm Screws (102) and two
M8 Split Washers (103).
Attach the Left Handlebar (11) in the same way.
102
103
105
105
10
11
5
Avoid pinching the
Pulse Wires (105)
27
21, 22