ProForm 14.0 Ce Elliptical English Manual - Page 7

2. Orient the Front Stabilizer (3) so that the 2 indicated hole is facing the pin on the Main Frame (1). While a second person lifts the front of the Main Frame (1), attach the Front Stabilizer (3) with two M10 x 95mm Screws (100). 3 100 Hole Pin 1 3. Identify and orient the Upright (5) and the Top Cover (27) as shown. 3 Slide the Top Cover (27) upward onto the Upright (5). Have a second person hold the Upright (5) and the Top Cover (27) near the Main Frame (1). Locate the wire tie in the Upright (5). Tie the lower end of the wire tie to the Wire Harness (60). Next, pull the upper end of the wire tie until the Wire Harness is routed through the Upright. Tip: To prevent the Wire Harness (60) from falling into the Upright (5), secure the Wire Harness with the wire tie. Wire Tie Wire Tie 60 5 27 1 7