ProForm 7.0 Re Elliptical English Manual - Page 10

9. Using a small plastic bag to keep your fingers clean, apply a generous amount of the included 9 grease to the axle on the right side of the Upright (2). Slide the Right Upper Body Arm (9) onto the Upright (2). Attach the Right Upper Body Arm (9) with an M8 x 20mm Screw (79) and an M8 Washer (33). Repeat this step on the other side of the elliptical. 8 2 Grease 9 33 79 10. Apply a small amount of grease to a Pivot Axle (31). 10 Insert the Pivot Axle (31) through the Right Pedal Arm (49) and the right Upper Body Leg (6) from the direction shown. Finger tighten an M6 x 18mm Screw (80), a Pivot Cover (32), and an M6 x 18mm Washer (55) into the indicated end of the Pivot Axle (31). Then, tighten both M6 x 18mm Screws (80) in the Pivot Axle (31) at the same time. Repeat this step on the other side of the elliptical. See step 8. Tighten the M8 x 35mm Bolts (76). 76 80 Grease 31 49 6 55 32 80 10