ProForm 7.0 Re Elliptical English Manual - Page 7
Orient the Upright 2 and the Front Shield Cover
 |
View all ProForm 7.0 Re Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Orient the Upright (2) and the Front Shield Cover (53) as shown. Slide the Front Shield Cover 3 upward onto the Upright. Avoid pinching the wires. Slide the Upright (2) onto the Frame (1). Connect the Upright Wire (28) to the Frame Wire (42). Insert the excess wire into the Upright (2). Avoid pinching the wires 2 53 28 42 1 4. Have a second person hold the Front Shield Cover (53) out of the way. 4 Attach the Upright (2) with six M8 x 20mm Screws (79). Do not fully tighten the Screws yet. Do not press the Front Shield Cover (53) into place yet. 53 79 2 79 79 79 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
7
3
3.
Orient the Upright (2) and the Front Shield Cover
(53) as shown. Slide the Front Shield Cover
upward onto the Upright.
Avoid pinching the wires.
Slide the Upright (2)
onto the Frame (1).
Connect the Upright Wire (28) to the Frame Wire
(42). Insert the excess wire into the Upright (2).
2
2
53
53
79
79
79
79
42
28
Avoid pinching
the wires
4.
Have a second person hold the Front Shield
Cover (53) out of the way.
Attach the Upright (2) with six M8 x 20mm
Screws (79).
Do not fully tighten the
Screws yet.
Do not press the Front Shield Cover (53) into
place yet.
4
1