ProForm 7.0 Re Elliptical English Manual - Page 9

7. While a second person holds the Console (4) near the Upright (2), connect the wires on the Console to the Upright Wire (28) and to the Pulse Wires (63). 7 4 Insert the excess wire into the Upright (2) or into the Console (4). Tip: Avoid pinching the wires. Attach the Console (4) to the Upright (2) with four M4 x 16mm Screws (64). Avoid pinching the wires 63 2 28 64 8. Identify the Right Upper Body Arm (9). 8 Orient the Right Upper Body Arm (9) and an Upper Body Leg (6) as shown. Insert the Right Upper Body Arm into the Upper Body Leg. Attach the Right Upper Body Arm (9) to the Upper Body Leg (6) with two M8 x 35mm Bolts (76) and two M8 Locknuts (77). Make sure that the Locknuts are inside the hexagonal holes. Do not fully tighten the Bolts yet. 8 Assemble the Left Upper Body Arm (8) and the other Upper Body Leg (6) in the same way. 77 76 6 76 9 Hexagonal Holes 77 6 9