ProForm 755 Crosstrainer Treadmill English Manual - Page 8

Aged When The Power Is Turned On.

Page 8 highlights

5. Lower the Frame (not shown) (see HOW TO 5 LOWER THE TREADMILL FOR USE on page 19). 64 Have a second person hold the Handrail (20) near the Uprights (84). Insert the Wire Harness 8 (77) into the hole in the bottom of the Handrail and out of the top as shown. Next, set the Handrail (20) on the Uprights (84). Do not let the Wire Harness (77) fall into the right Upright. Attach the Handrail (20) with four Handrail Bolts (64) and four Star Washers (8); start all four Handrail Bolts and then firmly tighten them. 6. While a second person holds the console assembly near the Handrail (20), attach the 6 ground wire to the indicated hole in the Handrail with a Ground Screw (33). 64 20 8 77 84 84 Ground Wire 33 Hole 20 7. While the second person continues to hold the console assembly, locate the wire harness underneath the console assembly. Connect the wire harness from the console assembly to the Wire Harness (77). See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and then try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Then, insert the connectors downward into the Handrail (20). 7 Wire Console 77 Assembly 20 Console Assembly 77 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28

7.
While the second person continues to hold the
console assembly, locate the wire harness un-
derneath the console assembly.
Connect the wire harness from the console as-
sembly to the Wire Harness (77).
See the inset
drawing. The connectors should slide to-
gether easily and snap into place.
If they do
not, turn one connector and then try again.
IF
THE CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAM-
AGED WHEN THE POWER IS TURNED ON.
Then, insert the connectors downward into the
Handrail (20).
8
77
Console
Assembly
77
20
6.
While a second person holds the console as-
sembly near the Handrail (20), attach the
ground wire to the indicated hole in the Handrail
with a Ground Screw (33).
20
Hole
Ground
Wire
Console
Assembly
33
6
7
Wire
5.
Lower the Frame (not shown) (see HOW TO
LOWER THE TREADMILL FOR USE on page
19).
Have a second person hold the Handrail (20)
near the Uprights (84). Insert the Wire Harness
(77) into the hole in the bottom of the Handrail
and out of the top as shown.
Next, set the Handrail (20) on the Uprights (84).
Do not let the Wire Harness (77) fall into the
right Upright.
Attach the Handrail (20) with four Handrail Bolts
(64) and four Star Washers (8);
start all four
Handrail Bolts and then firmly tighten them.
84
20
8
8
77
64
84
64
5