ProForm 850 Ci English Manual - Page 23
Trouble, Shooting, Maintenance
View all ProForm 850 Ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
TROUBLE-SHOOTING AND MAINTENANCE Inspect and tighten all parts each time you use the cross training system. Replace any worn parts immediately. The cross training system can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. ADJUSTING THE CABLES If there is slack in the cables before resistance is felt, the cables can be adjusted. To adjust the cable attached to the'weight stack near the stepper, find the Long `U" Bracket (19) labeled IA" in the drawing at the right. To adjust the cable attached to the weight stack near the cam arm, find the Long "Um Bracket (19) labeled "B" in the drawing at the right. To tighten the cable, thread the 5/16" Nylock Nut (1) farther onto the threaded end of the cable. If the cables cannot be properly tightened by tightening the 5/16" Nylock Nuts (1), the cables may need to be replaced. See the back cover of this owner's manual for information about ordering replacement parts. B 19 97 23