ProForm Crosswalk 480 Treadmill Canadian English Manual - Page 11
If The Connectors Are Not Con
View all ProForm Crosswalk 480 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
11. Attach the Left Handrail (21) to the console assembly with three M4.2 x 19mm Screws (1). Remove the ties from the two M8 Cage Nuts (39). If necessary, press the Cage Nuts back into place. 11 21 39 1 1 Console Assembly 12. Have a second person hold the console assembly near the Right Upright (80). Connect the Wire Harness (92) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON. Remove the wire tie from the Wire Harness. Then, insert the connectors into the Right Upright (80). Set the console assembly on the Right Upright (80) and the Left Upright (not shown). Make sure that no wires are pinched. 12 92 80 Console Assembly Console Wire Console Wire Wire Tie 92 11