ProForm Crosswalk 480 Treadmill Canadian English Manual - Page 12

13. Finger tighten two M8 x 25mm Bolts (4) with two M8 Star Washers (9) into the Left Upright (79) and the Left Handrail (21); do not fully tighten the Bolts yet. Next, finger tighten two M8 x 25mm Bolts (4) with two M8 Star Washers (9) into the Right Upright (80) and the Right Handrail (100). Then, tighten all four Bolts. See steps 5 and 8. Tighten the M10 x 96mm Bolts (7). 13 21 49 79 Console Assembly 94 100 49 94 80 14. Remove the Resistance Knob (88) from a resistance mechanism. Make sure that the 3/8" x 4 3/4" Bolt (3) stays inside of the resistance mechanism and that the resistance mechanism does not come apart. Note: See the lower drawing to reassemble the resistance mechanism if necessary. Insert the Resistance Cone (85) into the Upright Insert (84) in the Left Upright (79), with the two large holes on top as shown. Then, attach the Resistance Knob (88) onto the 3/8" x 4 3/4" Bolt (3). Do not fully tighten the Resistance Knob. Attach the other resistance mechanism to the Right Upright (80) as described above. 14 88 88 79 Large 84 Holes 80 85 Resistance Mechanism 3 Large Holes 3 12