ProForm G720 Bench Uk Manual - Page 6

ASSEMBLY Make Things Easier for Yourself This manual is designed to ensure that the weight bench can be assembled successfully by anyone. Most people find that by setting aside plenty of time, assembly will go smoothly. Before beginning assembly, carefully read the following information and instructions: • Assembly requires two persons. • For help identifying small parts, use the PART IDENTIFICATION CHART on page 5. • Tighten all parts as you assemble them, unless instructed to do otherwise. • As you assemble the weight bench, make sure all parts are oriented as shown in the drawings. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. The following tools (not included) are required for assembly: • two adjustable wrenches • one rubber mallet • one standard screwdriver • one Phillips screwdriver • lubricant, such as grease or petroleum jelly, and soapy water. Assembly will be more convenient if you have a socket set, a set of open-end or closed-end wrenches, or a set of ratchet wrenches. 1. Before assembling this product, make sure 1 that you have read and understand the infor- mation in the box above. Press four 40mm x 80mm Inner Caps (24) into the indicated ends of the two Uprights (1, 61). Insert an Oval Bushing (44) into the storage tube. Whilst another person holds the Crossbar (2), orient the two Uprights (1, 61) beneath it as shown. Slide the Crossbar down onto the Uprights and secure it with four M10 x 90mm Bolts (23) and four M10 Nylon Locknuts (11). Do not tighten the Nylon Locknuts yet. 2 1 44 11 61 23 24 11 Storage Tube 24 23 24 24 6