Ricoh Aficio MP 171SPF Operating Instructions - Page 80

Push the paper tray in until it stops., While pressing the release levers

Page 80 highlights

Adding Paper and Replacing Toner F Push the metal plate down, and then square the paper and place it in the tray. Do not stack paper over the limit mark. ASS004S G While pressing the release levers, push in the side and end fences until they are flush against the paper's edges. 6 H Push the paper tray in until it stops. Note ❒ When setting small quantities of copy paper, be careful not to squeeze in the side fence too much. Paper might not feed in properly if the side fence is too tight against the paper's edge. ❒ Be sure to set the correct size, otherwise a paper jam might occur. ❒ Load paper so that the paper touches the right side of the tray. Otherwise misfeeds might occur. 74

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100

Adding Paper and Replacing Toner
74
6
F
Push the metal plate down, and then square the paper and place it in the
tray.
Do not stack paper over the limit mark.
G
While pressing the release levers, push in the side and end fences until they
are flush against the paper's edges.
H
Push the paper tray in until it stops.
Note
When setting small quantities of copy paper, be careful not to squeeze in
the side fence too much. Paper might not feed in properly if the side fence
is too tight against the paper's edge.
Be sure to set the correct size, otherwise a paper jam might occur.
Load paper so that the paper touches the right side of the tray. Otherwise
misfeeds might occur.
ASS004S