Ricoh Priport DX 4640PD Printer Reference - Page 24
Network Configuration, Configuring the network using the control panel
View all Ricoh Priport DX 4640PD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Preparing to Print *1 Check [Active] is selected for TCP/IP. *2 Appears when the IEEE 802.11b interface unit is installed. If Ethernet and IEEE 802.11b (wireless LAN) are both connected to the printer, the selected interface has priority. Network Configuration 2 Any change you make with User Tools remains in effect even if the main power switch or operation switch is turned off, or if the {Clear Modes} key is pressed. Configuring the network using the control panel Note ❒ Operations for System Settings are different from normal operations. After using User Tools, press the {User Tools} key to exit. ❒ If the key operator code has been set, the key operator code entry screen appears. Enter the code, and then press the [OK] key. For details about the key operator code, see Operating Instructions. A Press the {User Tools} key. AVA002S B Press [System Settings]. C Press [Interface Settings]. D Select the setting you want to change, and then press [OK]. E Change the setting, and then press [OK]. Note ❒ To cancel changes made to settings and return to the System Settings menu, press [Cancel]. F Press [Exit]. G Press the {User Tools} key. Note ❒ You can also exit by pressing [Exit] on the User Tools main menu. 18