Ryobi YN500A Operator Manual - Page 7

FEATURES PRODUCT SPECIFICATIONS Motor 12 Volt DC High Pressure Hose Length 24 in. Gauge Analog (PSI, KG/CM2, and BAR) Maximum Pressure...... 150 PSI, 10.34 BAR, 10.55 KG/CM2 KNOW YOUR INFLATOR See Figure 1, page 12. The safe use of this product requires an understanding of the information on the inflator and in this operator's manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules. 12 V ADAPTOR This connector is used to charge the battery pack using appropriate 12 V DC power sources. NOTE: The adaptor will not power the tool. 12 V RECEPTACLE The inflator can be used to power other 12 V DC products. NOTE: Plugging the 12 V adaptor into the 12 V receptacle will discharge the inflator's power supply. CAUTION: Do not use the 12 V receptacle to power items rated less than 12 V or items without proper protection. Failure to heed this warning could result in damage to the inflator or the item being powered. AC ADAPTOR/CHARGER The inflator can be plugged into an AC power source. NOTE: The AC adaptor/charger provides charging function only, it will not power the tool. ACCESSORY COMPARTMENT The inflator features a storage space for inflator accessories and the AC adaptor/charger. NOZZLES Nozzles provided with the inflator can be used in a variety of applications. BUILT-IN HOSE WRAP The inflator has a built-in hose wrap that allows easy storage of the high pressure hose. CARRY HANDLE The inflator has a carry handle for easy transport. CORD WRAP The cord retainer keeps the 12 V adaptor cord neatly out of the way for storage. NOTE: To reduce cord slack, press excess cord into grooves in the cord retainer. DIAGNOSTIC FEEDBACK When the diagnostic button is pressed, the LEDs provide feedback to indicate the charge status of the inflator. HIGH PRESSURE AIR HOSE The high pressure hose can easily inflate high pressure items like motorcycle, car, and bicycle tires. INFLATOR ON/OFF SWITCH Depress the inflator on/off switch on to the on (I) position to power the inflator on. To turn the inflator off (O), depress the switch to the off position. PRESSURE GAUGE The pressure gauge measures air pressure from 0 to 150 psi. WORKLIGHT ON/OFF SWITCH Depress worklight on/off switch to turn light on and off. 7 - English