Samsung 710T-BLACK User Manual (user Manual) (ver.1.0) (English) - Page 94
PowerSaver, Preset Timing Modes, Devices using the SCSISmall Computer System Interface command set
View all Samsung 710T-BLACK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
If you turn the Client monitor off while booting, it may damage the product. Local Device (USB) compatibility HID(Human Interface Devices) : Keyboard, Mouse MSC(Mass Storage Class) : Devices using the SCSI(Small Computer System Interface) command set : FAT(File Allocation Table) System Exception Some manufacturers have wrongly specified their device as USB standard compatible. Our product has exception handling procedures. But Some devices are unlikely to work properly. Some manufacturers have wrongly specified their device as SCSI compatible. Such devices are unlikely to work properly. It is recommended that USB devices are purchased after they are tested and confirmed to be compatible. PowerSaver (When used as a normal monitor) This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor to low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in your computer. Use the software utility installed on your computer to set up this feature. State Power Indicator Power Consumption Normal Operation Green Less than 45 W Power saving mode Green, Blinking Less than 2 W (Off-mode) Power off (Power button) Off Less than 2 W PowerSaver (When used as a Client monitor) State Power Indicator Power Consumption Normal Operation Green Less than 35 W Power saving mode Green, Blinking Less than 2 W (Off-mode) Power off (Power button) Off Less than 2 W Preset Timing Modes If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the video card manual and adjust the screen as follows.