Samsung HMX-QF30BN User Manual Ver.1.0 (English) - Page 77

Connecting to a WLAN and configuring network settings Configuring the network settings You can configure network settings manually. Note that configuring these settings manually are not necessary in most cases. If your camcorder connected to the network after you followed the directions on page 72, your camcorder has adjusted these settings and you do not need to configure them manually. 1 Press the [Home ( )] button  touch Social Sharing. 2 Touch the MENU ( ) tab  Wi-Fi Setting. • The camcorder automatically searches for available AP devices. 3 Touch the tab next to an AP. Wi-Fi Setting Samsung 1 Samsung 2 Samsung 3 Samsung 4 5 Touch the tab. • The camcorder connects to the network via the selected AP. • Even if AP authentication and Data Encryption have been detected, set the authentication mode to Open or Shared. • If the camcorder does not detect the AP automatically, you can set the network properties directly. page 74 • Data encryption settings by authentication type are below: - Open  Disabled or WEP - Shared  WEP - WPA-PSK  TKIP, AES, or TKIP/AES Mixed - WPA2-PSK  TKIP, AES, or TKIP/AES Mixed • When the Data Encryption function is set to WEP or TKIP for 802.11n AP connection, you can access in the 802.11g mode. In the 802.11g mode, the network connection and speed are not guaranteed. 4 Touch each submenu and enter the required information. Item Authentication Description Select an authentication type according to your AP's setting. When you select Open or Shared, WPA is automatically set. Data Encryption Select an encryption type according to your AP's setting. Network Password IP Setting Enter the password using the virtual keyboard. page 75 The default is Auto. You can select Manual to set the IP address manually. Wireless network 73