Samsung HP-S4253 User Manual (ENGLISH) - Page 15
How to Adjust Mounting Angle
UPC - 036725242531
View all Samsung HP-S4253 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
3 Tighten the screws of the plastic hanger (shown in picture 2) to the back side of the PDP. 4 Remove the Safety Pins. Fasten the 4 plastic latches assembled at step (#) on the back side of the PDP using the guide holes of the wall mount, push (!) and hook (@) down to secure the PDP on the wall mount as illustrated. Secure the PDP by inserting the Safety Pins, not to fall from the wall mount. PDP Wall Bracket Wall How to Adjust Mounting Angle Note : Please secure the mounting bracket on the wall surface after setting its angle at 0° 1. Secure the SET to the wall mount bracket. (Please refer to the following instructions.) 2. Set the angle by pulling the upper end of the SET attached to bracket in the direction of the arrow. (Refer to the illustration on the right.) 3. The angle can be adjusted from 0° to 15° by ±2°. Hold onto the middle of the PDP to adjust the angle (not the sides of the PDP). 15