Samsung HP-S4253 User Manual (ENGLISH) - Page 90
How to Set up Your PC Software Windows only
UPC - 036725242531
View all Samsung HP-S4253 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
How to Set up Your PC Software (Windows only) The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) 1. Right click the mouse on the Windows Desktop, then click on Properties. The Display Dialog-Box will be displayed. 2. Click on Settings, then set the Display Mode by referencing the Display Modes Table. You do not need to change the Colors settings. 3. Click on Advanced. A new settings dialog box will be displayed. 4. Click on the Monitor tab, then set the Screen Refresh Rate with reference to the Display Modes Table (see page 91). Set the Vertical Frequency and Horizontal Frequency individually if you can do so instead of setting the Screen Refresh Rate. 5. Press the OK button, close the window, then 2 press the OK button on the Display Registration Information window. Automatic re-booting may commence at this moment. 3 6. Shutdown the PC, and connect it to your TV. (See page 88) • The actual screens on your PC may look different, depending on your particular version of Windows and the type of your PC. • When you use your TV as a PC monitor, it supports Colors up to 32 bits. • The display on the TV may look different 4 depending on your particular version of Windows or the PC manufacturer. • When connecting a PC you must set it to the display settings that are supported by the TV. Otherwise, the message "Out of input range" will be displayed. 5 Continued... 90