Samsung NQ70M6650DG/AA User Manual - Page 53
How to run a Hybrid cleaning cycle, Reservoir, Hybrid Clean, START/SET, OVEN OFF, English 53
View all Samsung NQ70M6650DG/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Before a Hybrid cleaning cycle • • • Fig. 1 • Don't hand clean the oven door gasket. Fig. 2 You may hand clean • the door. • Remove the wire rack, broil pan, broil pan insert, all cookware, and any aluminum foil from the oven. Wipe up debris from the oven bottom. (Fig. 1) The silver-colored oven racks can be Hybrid Cleaned, but they will darken, lose their luster, and become harder to slide. Residue on the front frame of the oven and outside the gasket on the door will need to be cleaned by hand. Clean these areas with hot water, soap-filled steel-wool pads, or cleansers such as Soft Scrub. Rinse well with clean water and dry. Do not clean the gasket. The fiberglass material of the oven door gasket cannot withstand abrasion. It is essential for the gasket to remain intact. If you notice it becoming worn or frayed, have it replaced. (Fig. 2) Make sure the oven light cover is in place and the oven light is off. NOTE Remove oven racks and accessories before starting the Hybrid clean mode. How to run a Hybrid cleaning cycle 1. Remove all accessories from the oven. 2. Open the oven door, and then touch Reservoir . The oven ejects the water reservoir. Grasp the front of the reservoir and pull it all the way out of the slot. 3. Pour approximately 20 oz. (600 ml) of water into the water reservoir. Use normal water only, not distilled water. NOTE You can open the reservoir by removing the rubber cap or by removing the clear plastic top. 4. Replace the rubber cap or clear plastic top. 5. Return the reservoir to the slot, and then push it in. There will be slight click when it is in place correctly. Touch Reservoir . The oven retracts the water reservoir. 6. Close the oven door. 7. Touch Hybrid Clean. Touch Hybrid Clean once for a 20 min clean time, twice for a 90 min clean time. (The default setting is 20 min.) 8. Touch START/SET. The motor-driven door lock will engage automatically. When the operation is complete, the display will blink and a beep will sound. NOTE Only the lower oven door is locked during Hybrid cleaning. 9. Touch OVEN OFF. 10. Clean the oven's interior. There will be a significant amount of water remaining on the bottom of the oven after a Hybrid cleaning cycle. Remove the residual water with a sponge or soft dry cloth. NOTE For Hybrid Cleaning, use exactly 20 oz. (600 ml). of water since this produces the best results. Maintaining your appliance NQ70M6650DS_AA_DE68-04446A-02_EN+MES+CFR.indb 53 English 53 2018-08-30 12:52:37