Samsung NQ70M6650DG/AA User Manual - Page 54
Descale, lime deposits with a cloth soaked in vinegar.
View all Samsung NQ70M6650DG/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Maintaining your appliance After a Hybrid cleaning cycle • Take care when opening the door after a Hybrid cleaning procedure has ended. The water on the bottom is hot. • Open the oven door and remove the remaining water with a sponge. Do not leave the residual water in the oven for any length of time. Wipe the oven clean and dry with a soft cloth. Do not forget to wipe under the oven door seal. • Use a detergent-soaked sponge, a soft brush, or a nylon scrubber to wipe the oven interior. Remove stubborn residue with a nylon scourer. You can remove lime deposits with a cloth soaked in vinegar. • If the oven remains dirty, you can repeat the procedure once the oven has cooled. • For heavy residue, such as grease left over from roasting, we recommend that you rub detergent into the residue before activating the Hybrid cleaning function. • After cleaning, leave the oven door ajar at a 15° angle to allow the interior enamel surface to dry thoroughly. NOTE • You will not be able to start a Hybrid cleaning cycle if the control lockout feature is activated or if the oven's temperature is too hot. • The oven doors lock automatically. The display will show the cleaning time remaining. You cannot to open the oven doors until the temperature drops to a safe/cool temperature. • The Hybrid clean feature can be used in only one oven at a time. While one oven is in Hybrid cleaning mode, you cannot use the other oven for cooking. • If the oven is not clean after one cycle, repeat the cycle. • You cannot set the oven for cooking until the oven is cool enough for the door to unlock. Descale If you use Steam Bake or Steam Roast frequently, we recommend descaling regularly to remove minerals from the oven that may affect the taste or quality of food cooked. When running a descaling cycle, use only descaling agents that are specific to steam ovens or coffee machines. NOTE If you use Steam Bake or Steam Roast functions for more than a total of 12 hours, the Descale indicator turns on. You can still enable the Steam Bake or Steam Roast functions for the next two hours without descaling. However, after those two hours are up, the Steam Bake or Steam Roast functions will be disabled until you run a descaling cycle. 1. Open the oven door, and then touch Reservoir . The oven ejects the reservoir. Grasp the front of the reservoir and pull it all the way out of the slot. 2. Empty and clean the water reservoir, and then fill it with 1.7 oz. (50 ml) of descaling agent and 13.5 oz. (400 ml) of water. NOTE You can open the reservoir by removing the rubber cap or by removing the clear plastic top. 3. Replace the rubber cap or clear plastic top. 4. Return the reservoir to the slot, and then push it in. There will be slight click when it is in place correctly. Touch Reservoir . The oven retracts the water reservoir. 5. Close the oven door. Maintaining your appliance 54 English NQ70M6650DS_AA_DE68-04446A-02_EN+MES+CFR.indb 54 2018-08-30 12:52:37