Samsung PN50A460S4D User Manual (user Manual) (ver.1.0) (English, Spanish) - Page 30

Setting the Blue Only Mode This function is for AV device measurement experts. This function displays the blue signal only by removing the red and green signals from the video signal so as to provide a Blue Filter effect that is used to adjust the Color and Tint of video equipment such as DVD players, Home Theaters, etc. Using this function, you can adjust the Color and Tint to preferred values appropriate to the signal level of each video device using the Red/Green/Blue/Cyan/Magenta/ Yellow Color Bar Patterns, without using an additional Blue Filter. 1 Follow the Activating Picture Options instructions numbers 1 and 2. (Refer to page 26) 2 Press the ▲ or ▼ button to select Blue Only Mode, then press the ENTER button. 3 Press the ▲ or ▼ button to select Off or On, then press the ENTER button. Press the EXIT button to exit. ➢ Blue Only Mode is available when the picture mode is set to Standard or Movie. T V Picture Options Color Tone : Normal Size : 16:9 Digital NR : Auto DNle : Off HDMI Black Level : Low Film Mode : Off Blue Only Mode : OOfff ▼ More On Move Enter Return Reducing the Effects of Screen Burn If screen burn has occurred, you can select a white screen or scrolling to help remove screen burn artifacts. 1 Follow the Activating Picture Options instructions numbers 1 and 2. (Refer to page 26) 2 Press the ▲ or ▼ button to select Screen Burn Protection, then press the ENTER button. 3 Press the ▲ or ▼ button to select Pixel Shift, White, Scrolling, or Side Gray then press the ENTER button. Press the EXIT button to exit. • White This function removes after-images on the screen by changing the color of pixels to white. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time. • Scrolling This function removes after-images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on the screen for a long time. • Side Gray When you watch TV with the screen ratio of 4:3, the screen is prevented from any damage by adjusting the white balance on both extreme left and right sides. To prevent the screen burn from happening, select Dark or Light. T V Picture Options ▲ More Screen Burn Protection ► 3D Effect ► Move Enter Return T V Screen Burn Protection Pixel Shift ► White ► Scrolling ► Side Gray : Light ► Move Enter Return T V Pixel Shift Pixel Shift : On ► Horizontal Dot : 2 ► Vertical Line : 2 ► Time : 2 min ► Move Enter Return • Dark : When you set the screen ratio to 4:3, it darkens the left and right sides. • Light : When you set the screen ratio to 4:3, it brightens the left and right sides. ➢ To remove after-images on the screen, use either the White or Scrolling function. Although both functions remove after-images on the screen, Scrolling is more effective. ➢ The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after- images on the screen. If the after-image is not removed after performing the function, repeat the function again. ➢ Press any key on the remote control to cancel this feature. Continued... English - 30