Samsung RS25J500DSR User Manual - Page 25

Separate the water supply line from the refrigerator, Remove the freezer door

Get Samsung RS25J500DSR PDF manuals and user guides View all Samsung RS25J500DSR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

2. Separate the water supply line from the refrigerator Remove one or two water lines, depending on the model, by pressing each coupler (1) and pulling the water lines (2) away. NOTE 1 • Your refrigerator may have one or two water lines, depending on the model. 2 If it has two, the lines are different colors. Make sure you match the colors when you re-attach them. CAUTION • Do not cut the water line. Gently separate it from the coupler. Setting up 3. Remove the freezer door A few things to mention first. • Make sure that you lift the door straight up so the hinges are not bent or broken. • Be careful not to pinch the water tubing and wire harness on the door. • Place doors on a protected surface to prevent scratching or damage. • Is necessary, have two people disassemble the doors. 1. With the Freezer door closed, remove the upper hinge cover (1) using a screwdriver, and then disconnect the wires by gently pulling them apart (2). 2 1 NOTE • Be careful not to damage the sensor harness with the hinge cover. DA68-02981N-00.indb 25 English 25 2015. 3. 3. 9:34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
English 25
Setting up
2. Separate the water supply line from the refrigerator
1
2
Remove one or two water lines, depending
on the model, by pressing each coupler (1)
and pulling the water lines (2) away.
NOTE
• Your refrigerator may have one or two
water lines, depending on the model.
If it has two, the lines are different
colors. Make sure you match the colors
when you re-attach them.
CAUTION
• Do not cut the water line.
Gently separate it from the coupler.
3. Remove the freezer door
A few things to mention first.
•
Make sure that you lift the door straight up so the hinges are not bent or broken.
•
Be careful not to pinch the water tubing and wire harness on the door.
•
Place doors on a protected surface to prevent scratching or damage.
•
Is necessary, have two people disassemble the doors.
1
2
1.
With the Freezer door closed, remove
the upper hinge cover (1) using a
screwdriver, and then disconnect the
wires by gently pulling them apart (2).
NOTE
• Be careful not to damage the sensor
harness with the hinge cover.
DA68-02981N-00.indb 25
DA68-02981N-00.indb
25
2015. 3. 3.
9:34
2015. 3. 3.
9:34