Samsung RS25J500DSR User Manual - Page 33
Compression nut B 1/4
View all Samsung RS25J500DSR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Setting up Refrigerator Plastic Tubing Compression (Supplied) Nut (1/4") Compression (6.35 mm) Fitting (Assembled) (Assembled) Férula (no provista) Bulb Compression nut (B) (1/4") (6.35 mm) (Not supplied) Plastic tubing Copper tubing (Not supplied) or (B) (Not supplied) Household water line 1. Connect the household water line to the assembled compression fitting. - If you are using copper tubing, slip the compression nut (B) (not supplied) and ferrule (not supplied) on the copper tubing (not supplied) as shown. - If you are using plastic tubing (B), insert the molded end (Bulb) of the plastic tubing (B) into the compression fitting. CAUTION • Do not use plastic tubing (B) without the molded end (Bulb). 2. Tighten the compression nut (B) onto the compression fitting. Do not over-tighten the compression nut (B). 3. Turn the water on and check for any leaks inside the refrigerator, around the water filter, and in any connection areas. If you find water drops or leaks, turn off the main water supply. If the leaks are in the connection areas, check the connections and, if necessary, tighten. If there are leaks in the refrigerator, check the water filter and confirm it is in the locked position. Turn on the water supply and check for leaks again. 4. Plug in the refrigerator. English 33 DA68-02981N-00.indb 33 2015. 3. 3. 9:34