Samsung RS25J500DSR User Manual - Page 29

Leveling the refrigerator

Get Samsung RS25J500DSR PDF manuals and user guides View all Samsung RS25J500DSR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Setting up Leveling the refrigerator Make sure the refrigerator is level so that you can make final adjustments. Use a level to test if the refrigerator is level both side to side and back to front. If the refrigerator is not level, you will not be able to get the doors perfectly even, which may cause moisture condensation and increased energy bills. NOTE • The front of the refrigerator is also adjustable. Before levelling the refrigerator, remove the front leg cover. Open both the freezer and refrigerator doors. Unscrew the three screws holding the front leg cover in place by turning them counterclockwise. When the screws are loose, remove the front leg cover. When the Freezer part is lower than the Fridge part. Insert a flat-blade screwdriver into a slot on the Freezer Leg, then turn it clockwise. When the Fridge part is lower than the Freezer part. Insert a flat-blade screwdriver into a slot on the Fridge Leg, then turn it clockwise. Leg Screw Driver NOTE • Refer to the next section for the best way to make very minor adjustments to the doors. English 29 DA68-02981N-00.indb 29 2015. 3. 3. 9:34

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
English 29
Setting up
Leveling the refrigerator
Make sure the refrigerator is level so that you can make final adjustments.
Use a level to test if the refrigerator is level both side to side and back to front.
If the refrigerator is not level, you will not be able to get the doors perfectly even, which
may cause moisture condensation and increased energy bills.
NOTE
•
The front of the refrigerator is also adjustable.
Before levelling the refrigerator, remove the front leg cover.
Open both the freezer and refrigerator
doors.
Unscrew the three screws holding the front
leg cover in place by turning them counter-
clockwise.
When the screws are loose, remove the
front leg cover.
When the Freezer part is lower than the Fridge part.
Insert a flat-blade screwdriver into a slot on the Freezer Leg, then turn it clockwise.
When the Fridge part is lower than the Freezer part.
Leg
Leg
Screw Driver
Insert a flat-blade screwdriver into a slot
on the Fridge Leg, then turn it clockwise.
NOTE
• Refer to the next section for the best
way to make very minor adjustments to
the doors.
DA68-02981N-00.indb 29
DA68-02981N-00.indb
29
2015. 3. 3.
9:34
2015. 3. 3.
9:34