Samsung SL-K4350LX User Manual Ver.1.0 (English) - Page 235

Solving other problems Condition The machine does not print. The machine selects print materials from the wrong paper source. Possible cause The port setting is incorrect. The machine may be configured incorrectly. The printer driver may be incorrectly installed. The machine is malfunctioning. The document size is so big that the hard disk space of the computer is insufficient to access the print job. The paper option that was selected in the Printing Preferences may be incorrect. Suggested solutions Check the Windows printer setting to make sure that the print job is sent to the correct port. If the computer has more than one port, make sure that the machine is attached to the correct one. Check the Printing Preferences to ensure that all of the print settings are correct (see "Opening printing preferences" on page 68). Repair the machine software. Check the display message on the control panel to see if the machine is indicating a system error. Contact a service representative. If printing GUI, make more hard disk space available for your print job and try printing the document again. For many software applications, the paper source selection is found under the Paper tab within the Printing Preferences. Select the correct paper source. See the printer driver help screen (see "Opening printing preferences" on page 68). Condition A print job is extremely slow. Half the page is blank. Possible cause Suggested solutions The job may be very Reduce the complexity of the page complex. or try adjusting the print quality settings. The page orientation Change the page orientation in setting may be incorrect. your application. See the printer driver help screen. The paper size and the Ensure that the paper size in the paper size settings do printer driver settings matches the not match. paper in the tray. Or, ensure that the paper size in the printer driver settings matches the paper selection in the software application settings you use. 9. Troubleshooting 235