Samsung TX-T2742 User Manual (user Manual) (ver.1.0) (English) - Page 16

Memorizing the Channels Your TV can memorize and store all of the available channels for both "off-air" (antenna) and cable channels. After the available channels are memorized, use the CH or CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channels: selecting a broadcast source, memorizing the channels (automatic) and adding and deleting channels (manual). Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the TV (i.e. an antenna or a cable system). TV Auto Program Channel √ 1. Press the MENU button to display the menu. Press the ... or † button to select "Channel", then press the ENTER button. Add/Delete : Deleted √ Air/CATV : Air Name LNA : ---- : Off √ Move Enter Return TV Auto Program Channel √ Add/Delete : Deleted √ Air/CATV : Air Name LNA : ---- : Off √ Move œ √ Adjust Return 2. Press the ... or † button to select "Air/CATV", then press the ENTER button. Press the œ or √ button to select "Air", "STD", "HRC", or "IRC". Press the EXIT button to exit. Storing Channels in Memory (Automatic Method) TV Auto Program Channel √ Add/Delete : Deleted √ Air/CATV : Air Name LNA : ---- : Off √ Move Enter Return 1. Press the MENU button to display the menu. Press the ... or † button to select "Channel", then press the ENTER button. 2. Press the ENTER button to select "Auto Program", then press the ENTER button. Auto Program Air 13 Start Enter Return 3. Press the ENTER button to start the auto program. The TV begins memorizing all available channels. Press the ENTER button at any time to interrupt the memorization process. Press the EXIT button to exit. English-16