Samsung TX-T2742 User Manual (user Manual) (ver.1.0) (English) - Page 26

LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). TV Auto Program Channel √ Add/Delete : Deleted √ 1. Press the MENU button to display the menu. Press the ... or † button to select "Channel", then press the ENTER button. 2. Press the ... or † button to select "LNA", then press the ENTER button. Air/CATV : Air Name LNA : ---- : Off √ Move Enter Return TV Auto Program Channel √ Add/Delete : Deleted √ Air/CATV : Air Name : ---- LNA Move : OOffff On Enter Return 3. Press the ... or † button to select "Off" or "On", then press the ENTER button. Press the EXIT button to exit. ➢ If the picture is noisy with the LNA set to On, select Off. ➢ The LNA setting must be made separately for each channel. Using the R.Surf Feature This feature allows you to set the TV to return to a particular channel after a certain amount of time. For example, you may be watching a channel when commercials start. You can set the R.Surf to "5 minutes", then switch channels. After 5 minutes, the TV will return to the original channel. To use the R.Surf feature: 1. While you are watching the channel to which you want to return, press the R.SURF button. The "Surf Off" is displayed. 2. Press the R.SURF button again to set the timer in thirty second intervals, up to five minutes. ➢ The time will start decreasing while you are setting up the timer, and will reset after 5 minutes has passed or you turn it off. 3. The time you set will begin counting down on the screen. When the time runs out, the TV will return to the channel you were watching when you set the timer. Surf 0: 30 English-26