Sanyo DP26746 Owners Manual - Page 13
Using Component Jacks To Connect A Dvd Player Or, Other Digital Equipment - screen
UPC - 086483058660
View all Sanyo DP26746 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
DIGITAL AV CONNECTIONS USING COMPONENT JACKS TO CONNECT A DVD PLAYER OR OTHER DIGITAL EQUIPMENT The Component Video jacks will accept any video content. Switch off DTV and external equipment before connecting cables. (Cables are not supplied.) Follow these steps to easily connect your STB or DVD Player to this DTV: 1 Connect DVD Player or similar digital equipment's Component Video Out to the DTV's Video (VIDEO3) jacks. 2 Connect DVD Player or similar digital equipment's Audio Out to the DTV's VIDEO3 Audio jacks. 3 Press POWER to turn on the DTV, then turn on external equipment. 4 Press INPUT to select Video 3 to view the DVD program. What you will need for connections: Component Video Cable - 1 Audio Cable - 1 2 REMOTE CONTROL 4 3 DVD PLAYER (or similar digital device such as a Satellite Receiver.) 1 DTV BACK COMPONENT JACKS I VIDEO2 and VIDEO3 jacks have identical functions. Compatible video devices can be connected to either set of jacks. I Press the INPUT key after connecting the cables, to select the Video 2 or Video 3 input signal. There is NO need to tune to a blank channel. I "No Signal" will appear randomly on the screen when no signal is detected at the VIDEO2 or VIDEO3 inputs. IMPORTANT NOTE FOR MONITOR USE: If you did not connect an antenna, you must run All Channel Search twice before you can select the AV inputs. 13 Need help? Visit our Web site at www.sanyoctv.com or Call 1-800-877-5032