Sanyo PLC XU73 Owners Manual - Page 13
Installation, Positioning the Projector, Adjustable Feet
View all Sanyo PLC XU73 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installation Positioning the Projector For projector positioning, see the figures below. The projector should be set horizontally to the flat screen. ✔Note: • The brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image. • The values shown below are approximate and may vary from the actual sizes. A : B = 10 : 1 43.3' (13.2m) 23.9' (7.3m) 18.0' (5.5m) 200 11.8' (3.6m) 150 4.6' (1.4m) 166 100 126 40 33" 83 300 (Inch Diagonal) Max. Zoom 250 Min. Zoom A (Center) B Screen Size (W x H) mm 4 : 3 aspect ratio Zoom (min) Zoom (max) 40" 813 x 610 5.6' (1.7m) 4.6' (1.4m) 100" 2032 x 1524 14.4' (4.4m) 11.8' (3.6m) 150" 3048 x 2286 21.7' (6.6m) 18.0' (5.5m) 200" 4064 x 3048 28.9' (8.8m) 23.9' (7.3m) 300" 6096 x 4572 43.3' (13.2m) 36.1' (11.0m) Installation Adjustable Feet Projection angle can be adjusted up to 10.0 degrees with the adjustable feet. 1 Lift the front of the projector and pull upward the feet lock latches on both sides of the projector. 2 Release the feet lock latches to lock the adjustable feet and rotate the adjustable feet to adjust the position and tilt. 3 To retract the adjustable feet, lift the front of the projector and pull and undo the feet lock latches. Keystone distortion of the projected image can be corrected by menu operation. (p22, 41) Adjustable Feet Feet Lock Latches 13