Sanyo VCC-XZ600N Installation Manual - Page 8

Connections ■ Connection when Using PoE (Power over Ethernet) Power Supply This camera provides simultaneous delivery of video in the JPEG and H.264 formats and also bi-directional video between the camera and PC. ● Do not use the power supply of the camera. ● Do not supply power to the PoE hub or PoE power adapter until the camera installation is finished. ● System Requirements The system requirements for camera operation via network are as follows: • PC: IBM PC/AT and compatibles • OS: Windows XP Home Edition/Windows XP Professional • CPU: Pentium IV (2.0 GHz or higher) (3.0 GHz or higher for using the VA-SW3050Lite) • Memory: 512MB or more (1 GB or more for using the VA-SW3050) • Network interface: 10Base-T/100Base-TX (RJ-45 connector) • Graphics processor: nVIDIA: GeForce 6000 series or higher ATI: RADEON X1000 series or higher • Display card: 1024 x 768 pixels or higher, 16 million colors or higher • Web browser: Internet Explorer Ver.6.0 or higher Connect the camera to the LAN through a switching hub using shielded LAN cables. PC LAN cable PC When directly connecting (CAT5 or higher, straight type) the camera to a PC, use Max. 100 m/109 yds the LAN cable (cross type). Switching hub TV monitor When using the IE/VA-SW3050Lite/ VA-SW3050 client version: You need a PC for the VA-SW3050 server version. LAN cable (CAT5 or higher, straight type) Max. 100 m/109 yds When using the IE/VA-SW3050Lite/ VA-SW3050 server version: You need the VA-SW3050 client version to view live/ replayed video, because the VA-SW3050 server version is used for recording purpose only. Video output (BNC connector) MEMO: You may extend the transmission distance by using multiple switching hubs with PoE support. For details on the extendable distance, please refer to the hub performance in the specifications, etc. 7