Sanyo VCC-XZ600N Installation Manual - Page 9

Connection when Not Using PoE Power Supply, Internet connection, About the internet connection

Get Sanyo VCC-XZ600N - Network Camera - Weatherproof PDF manuals and user guides View all Sanyo VCC-XZ600N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

■ Connection when Not Using PoE Power Supply ● Internet connection Connect the camera to a router or ADSL modem with LAN interface using shielded LAN cables. When connecting to a router, use the straight type LAN cable (CAT5 or higher). When connecting to an ADSL modem or other devices, refer to the instruction manual for the device. Router or ADSL modem Internet ● About the internet connection Port forwarding must be set on two of the router ports (camera side). For details on how to set port forwarding, please refer to your router's instruction manual. • Video port number Conduct the following port forwarding settings with respect to the router: IP address on the LAN side: Camera IP address (default: 192.168.0.2) Port number on the LAN side: Camera video port number (default: 80) Port number on the WAN side: Optional For communication, use TCP/IP. MEMO: When viewing video in H.264 format over the Internet, set the communication protocol of H.264 to "HTTP". (Refer to the instruction manual contained in the supplied CD-ROM.) 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
8
■
Connection when Not Using PoE Power Supply
●
Internet connection
Connect the camera to a router or ADSL modem with LAN interface using shielded LAN cables.
●
About the internet connection
Port forwarding must be set on two of the router ports (camera side).
For details on how to set port forwarding, please refer to your router's instruction manual.
•
Video port number
Conduct the following port forwarding settings with respect to the router:
IP address on the LAN side:
Camera IP address (default: 192.168.0.2)
Port number on the LAN side:
Camera video port number (default: 80)
Port number on the WAN side:
Optional
For communication, use TCP/IP.
When connecting to a router, use the straight type LAN cable (CAT5 or higher).
When connecting to an ADSL modem or other devices, refer to the instruction manual for the device.
MEMO:
When viewing video in H.264 format over the Internet, set the communication protocol of H.264
to "HTTP". (Refer to the instruction manual contained in the supplied CD-ROM.)
Router or
ADSL modem
Internet